Bedienungsanleitung Clarion WXZ468RMP (Seite 17 von 41) (Englisch)

63180

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

280-8262-00

WXZ468RMP 17

English

RDS Operations

Auto store function for TP stations

You can automatically store up to 6 TP stations into

preset memory. If the number of TP can be received

less than 6, broadcast stations already stored in

memory and left without being overwritten.

As “TA” lit in the display, press and hold the

[SEARCH] knob for 2 seconds or longer. The

TP stations with the good reception sensitivity

are stored into preset memory.

∗ Even if you select FM1 or FM2, a TP station is stored

into memory for FM3.

PTY

This function enables you to listen to a broad-

cast of the selected programme type even if the

unit is on a function mode other than radio.

∗The factory default setting is “OFF“.

∗ Some countries do not yet have PTY broadcast.

∗ In the TA standby mode, a TP station has priority

over a PTY broadcast station.

●Setting/Cancelling the PTY standby mode

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS mode.

2. Turn the [SEARCH] knob to select “PTY”.

3. Turn the [A-MODE] knob to select “ON” or

“OFF”.

∗ You cannot select “ON” or “OFF” during a TA,

ALARM or PTY interrupt.

● ON:

“PTY” is lit in the display and the PTY

standby mode turns on.

● OFF:

“PTY” goes off in the display and the PTY

standby mode turns off.

4. Press the [ADJ] button to return to the previ-

ous mode.

●Cancelling a PTY interrupt broadcast

Press the [TA] button or [SOURCE] knob during

the PTY broadcast, the PTY interrupt is can-

celled and the unit returns to PTY standby

mode.

Selecting PTY

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS mode.

2. Turn the [SEARCH] knob to select “PTY

SEL”.

∗ You cannot select “PTY SEL” during a TA,

ALARM or PTY interrupt.

3. Press the [SEARCH] knob to go to the PTY

select mode.

4. Press any one of the [DIRECT] buttons. Al-

ternatively, Turning the [A-MODE] knob to

select the desired PTY.

∗ Below are the factory default settings stored

for the [DIRECT] buttons.

PTY item

ENGLISH Contents

1 News News

2 Info Information

3 Pop M Pop Music

4 Sport Sport

5 Classics

Serious Classical Music

6 Easy M

Easy Listening Music

Preset

number

5. The PTY select mode is cancelled automati-

cally and returns to the RDS mode 7 sec-

onds after a PTY is selected.

PTY seek

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS mode.

2. Turn the [SEARCH] knob to select “PTY

SEL”.

3. Press the [SEARCH] knob to go to the PTY

select mode.

4. Select PTY.

5. Turn the [SEARCH] knob. If you turn the

knob right, the unit seeks a PTY broadcast

moving up the frequencies; if you turn the

knob left, it seeks moving down the frequen-

cies.

∗ If no station with the selected PTY broadcast

can be received, the unit returns to the previ-

ous mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion WXZ468RMP Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion WXZ468RMP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info