Bedienungsanleitung Clarity D704 (Seite 14 von 25) (Englisch)

648608

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

24 25

Find the Handset

You can use the handset locator feature to nd misplaced handsets.

To start the paging tone:

Press <FIND> on the telephone base. All the registered handsets will ring,

and the ** Paging** is ashing on handset screen.

To stop the paging tone:

• Press <TALK ON / FLASH>, <SPEAKER>, or any dial pad key (0-9 *, or

#) on the handset(s).

- OR -

• Press <FIND> on the telephone base or put the handset in the

telephone base or charge.

Make an Internal Call

This feature is only applicable when there are at least two registered handsets.

It allows you to make internal calls, transfer external calls from one handset to

another handset and make conference calls.

Intercom Another Handset

1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select

Intercom.

2. Press<MENU/SELECT>:

• If you have two handsets, your handset screen shows Calling

other handset. The other handset rings and its screen shows

Other handset is calling.

• If you have more than two registered handsets, your screen shows

Intercom to: Use the dial pad keys to select the other handset.

Your handset screen shows Calling HANDSET X. The other

handset rings and its screen shows HANDSET X is calling.

3. The called handset rings. Press <TALK ON/FLASH> or <SPEAKER> on

the called handset to establish the internal call.

Transfer an External Call from Handset to Handset

During an external call:

1. Press <MENU/SELECT>, then <UP/DOWN> to select Intercom.

2. Press <MENU/SELECT>:

• If you have two handsets, the outside call is put on hold and your

handset screen shows Calling other handset. The other handset

rings and its screen shows Other handset is calling.

• If you have more than two registered handsets, your screen shows

Intercom to: Use the dial pad keys to enter a handset number.

The outside call is put on hold and your handset screen shows

Calling HANDSET X. The other handset rings and its screen

shows HANDSET X is calling.

3. The external call is put on hold automatically and the called handset

rings.

4. Press <TALK ON/FLASH> or <SPEAKER> on the called handset to

establish an internal call.

5. Press <TALK OFF/CLEAR> on the calling handset or put the calling

handset on the charging cradle to end the current call with the

external party.

6. The external call is transferred to the called handset.

Make a 3-way Conference Call

The conference call feature allows one external call to be shared with two

handsets or a handset and base. The three parties can share the conversation

and no network subscription is required.

During an external call, press <TALK/FLASH> or <SPEAKER> on the handset

to establish the conference call if another handset has answered the call.

NOTE: Any handset that hangs up during a call will leave the rest of the

handsets still in connection with the external caller.

USING YOUR PHONE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarity D704 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info