Bedienungsanleitung Clatronic AR 737 (Seite 25 von 36) (Deutsch, Englisch)

551760

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

REG OFF: The programme identiﬁ cation (PI) of the regional

programme is ignored during the search for an alternative

frequency (AF) or a programme identiﬁ cation (PI).

• PI MUTE/PI SOUND (only for radio operation)

If you are in an area where two programme identiﬁ cations

(PI) overlap, you can select the option PI SOUND and PI

MUTE for playback of the sound. Alternate switching of the

programme identiﬁ cation should be avoided.

PI SOUND: If switching nevertheless occurs the sound of

another station is heard for less than one second.

PI MUTE: The sound of another station is suppressed.

• AF (Alternative Frequencies)

AF is a function that works with the help of RDS (Radio Data

System) and can only be used with FM stations. The radio

searches in the background for the best frequency reception

of the station that has been tuned into.

AF ON: If the AF function has been switched on, the radio

continuously tests the signal strength of the AF frequency.

The test interval for each AF frequency depends on the

signal strength of the current station and varies from a few

minutes in the case of a strong signal to a few seconds in

the case of weak signals. Whenever the new AF frequency

is stronger than the station that is currently tuned in, the

radio switches to this frequency for a short time and the

message „NEW FREQUENCY“ is displayed for one to two

seconds. As the mute time during the frequency change and

the test time is very short, this is almost inaudible during the

normal programme.

ޥ NOTE:

The AF function can also be activated by keeping the TA

button (19) pressed down.

The status of the AF function is shown by an AF symbol in

the display.

• If the AF symbol appears in the display, the AF function

is switched on and RDS transmission data is being

received.

• If the AF symbol ﬂ ashes in the display, the AF function

is selected but no RDS signal can be received at the

moment.

AF OFF: The function is switched off. The AF symbol in the

display goes off.

4. EJ Button

Press this button to insert and eject the CD/DVD. The ope-

rating unit swings downwards. Insert the CD/DVD with the

labelled side facing upwards gently into the CD slot until the

device draws in the CD/DVD automatically. The operating

unit automatically swings back to the normal position.

ޥ NOTE:

• Do not place your ﬁ ngers behind the operating unit.

There is a danger of injury when the operating unit

returns to the normal position.

• If you do not insert a CD/DVD the operating unit only

returns to the normal position after a certain time, or

you can press the EJ button again.

5. TFT Display (liquid crystal display)

6. BND button

Press the BND button brieﬂ y to switch between the 3 FM

bands and the 2 MW (medium wave) bands. The designati-

on of the corresponding level - FM1, FM2, FM3, MW1, MW2

- is shown in the TFT.

7./8

. / Buttons TUNE, SEEK, TRACK, SKIP UP/DOWN

a) In radio mode: Move the SEL button in the direction of

„ “ or „ “ in order to set a radio station manually. Keep

the SEL Taste pressed down in the „ “ or „ “ direction

in order to start the search for a radio station.

b) In CD/DVD, USB mode: If you wish to jump forwards or

backwards press the SEL button brieﬂ y in the „ “ or „ “

direction. To wind through the tracks keep the SEL but-

ton pressed in the „ “ or „ “ direction for approximately

2 seconds. FF X2 appears in the display. Operating the

SEL button again in the „ “ or „ “ direction for approxi-

mately 2 seconds increases the winding speed. Speeds

of FF X2, FF X4, FF X8 and FF X16 are available. Press

the

II button (18) to return to normal playback.

9. MOD Button

Press this button to select the CD/DVD player, AUX IN, radio

mode etc.

10. MU Button (Mute)

Press the MU button to switch off the loudspeakers for a short

period. The word MUTE ﬂ ashes in the display. Press this

button again to cancel the mute function. This function can

also be cancelled by pressing the VOL multifunction button.

11. APS Button (Autostore - Automatic Station Storage)

In radio mode:

a) Memory function:

Move the SEL button in the direction of APS for approxi-

mately 2 seconds to activate automatic station storage.

The radio searches within the current frequency band,

e.g. FM 1, for the strongest signal level until the search

cycle has ﬁ nished. The six strongest stations are then

allocated to the corresponding storage locations. Then

the station of the ﬁ rst storage location is set.

If you would like to search for more stations in the FM

band, press the BND button in order to change to the

FM 2 or FM 3 band. Move the SEL button again in

the direction of APS for approximately 2 seconds to

continue the search.

b) Scan Function:

If the SEL button is moved brieﬂ y in the direction of

APS, the radio brieﬂ y plays all the preset stations of the

frequency band.

05-AR 737 DVD_GB 25 21.08.2006, 11:50:00 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic AR 737 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info