Bedienungsanleitung Clatronic bs 1257 (Seite 33 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

316204

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

ENGLISH

Winding

Press the cable winding button and guide the cable. Hold the

cable to avoid wrapping.

Telescope Vacuum Pipe

• The height-adjustable vacu-

um pipe enables individual

alignment to your height.

• Unlock the coupling by pres-

sing the key in the direction

of the arrow.

• Slide the vacuum pipe to the

desired length.

• To lock the device, release

the key until you hear it lock

in place.

Nozzle accessories

Groove and brush nozzle: For vacuuming upholstery, cur-

tains and in corners and crevices

etc.

„2-in-1“ nozzle: When this is

folded together it can be used as

a groove nozzle. If you would like

to use the brush nozzle, pull the

brush section in the direction of

the arrow until it locks in place.

Upholstery nozzle: For cleaning upholstery, curtains

etc.

Floor nozzle: To clean carpets or smooth

surfaces.

In order to facilitate control, the

ﬂ oor nozzle is ﬁ tted with rollers

and can be adjusted to suit the

circumstances.

Carpet: make sure that the

brushes on the ﬂ oor nozzle

are deactivated when cleaning

carpets. If this is not the case,

press the lever on the ﬂ oor nozzle

forwards with your foot.

In order to vacuum even

surfaces, for example, press the

lever back with your foot. This

activates the brushes (you can

tell whether this is the case by

checking that the brushes are

visible on the ﬂ oor nozzle).

Releasing the nozzles: Pull these off while turning

slightly.

Air Slide

Open the air slide on the hose handle in order to regulate the

airﬂ ow or to clear any particles sticking to the nozzle.

Filter System or Dust Bag

You can operate your vacuum cleaner with the dust ﬁ lter system

or a conventional dust bag. For this you will ﬁ nd the dust bag

carrier among the accessories.

Dust Bag

If the ﬁ lling level indicator (1) lights up the dust bag has to be

replaced.

Illustration A

• Pull the plug out of the

socket.

• Open the lid of the dust

compartment with the button

(5) (see illustration A).

Illustration B

• Pull the dust bag out of the

holder (see illustration B).

• Insert a new dust bag.

• Close the cover so that it

snaps into place.

Dust Filter System

• Your device also has a dust ﬁ lter system. The conventional

dust bag can b replaced by a dust container.

• In this, coarse dirt particles and tiny particles ﬂ oating in the

air are swirled out of the suction air by the high speed of the

air current.

• The purchase of dust bags is no longer necessary.

ޥ NOTE:

If you would like to use the dust container the dust bag carrier

has to be removed from the device beforehand.

Removing the Dust Container and Filter

If the ﬁ lling leve indicator (1) lights up the dust container needs

emptying.

Please proceed as follows:

Illustration C

• Open the lid of the dust

compartment with the button

(5) (until its locks in place).

• Lift out the dust container

by pulling upwards (see

illustration C).

05-BS 1257 33 04.05.2007, 12:38:03 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic bs 1257 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info