Bedienungsanleitung Clatronic mc 1027 cd mp3 (Seite 29 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

159842

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

General safety instructions

To avoid the risk of ﬁ re or an electric shock, you should

not expose the device to rain or moisture. Consequently,

do not use the device in the immediate vicinity of water

- for example near a bath tub, a swimming pool or in a

damp cellar.

Use the device only for the intended purpose.

Only connect the device at a properly installed plug so-

cket. Pay attention that the speciﬁ ed voltage corresponds

to the voltage of the plug socket.

When using external mains supply, pay attention to the

correct polarity and voltage. Always place the batteries in

the correct direction.

Assemble the device in such a way that the available

ventilation openings are not covered.

Never open the housing of the device. Incorrect repairs

can constitute a considerable risk for the user. Should the

device become damaged, in particular the mains supply

cable, do not operate the device any longer, but rather

have it repaired by an expert. Check the mains supply

cable regularly for damage.

For safety reasons a broken or damaged mains lead may

only be replaced by an equivalent lead from the manuf-

acturer, our customer service department or a similary

qualiﬁ ed person.

If the device is not used for a longer period, remove

the plug connector from the plug socket or take out the

batteries.

These symbols may be found on the machine and are

intended to indicate the following:

The lightning symbol should advise the user

of parts in the inside of the device which carry

dangerously high voltage levels.

The symbol with an exclamation mark should

advise the user of important operation or

maintenance instructions in the accompanying

documentation.

Devices bearing this symbol work with a

„class 1 laser“ for tracing the CD. The built-in

safety switches should prevent the user being

exposed to dangerous laser light, which is

invisible to the human eye, when the CD compartment is

opened.

Under no circumstances should these safety switches be

bypassed or manipulated, as this could result in a danger

of exposure to the laser light.

Special safety information

This device works with

a class 1 laser.

Overview of the Components

1 POWER button

2 STANDBY control lamp

3 SENSOR Sensor for the remote control

4 BASS BOOST button (ON/OFF)

5 VOLUME ̆ / ̄ buttons

6 FUNCTION Function selector switch

(AUX / CD / RADIO)

7 USB connection

8 TUNING control

9 BAND Band selector switch (MW/AM / FM / FM ST)

10 FOLDER ̈ / ̇ buttons (album up / down)

11 CD compartment

12 PUSH/OPEN CD compartment

13 LCD display

14 ̈ II PLAY/PAUSE button

(Play/Pause / USB CD switching)

15 ˾ STOP button

16 İ̇ / ̈̈I SEARCH/SKIP buttons

(reverse search/forward search)

17 MODE button (repeat / random)

18 PROGRAM button (memory)

Headphone connection

Reverse Side

20 AUX IN socket

21 AC INPUT Mains connection

22 SPEAKER R/L Loudspeaker connections

23 FM ANT throw-out aerial

Remote Control

POWER button

2 VOLUME ̆ / ̄ buttons

3 ̈ II PLAY/PAUSE button

(Play/Pause / USB CD switching)

4 ˾ STOP button

5 İ̇ / ̈̈I SKIP/SEARCH buttons

(reverse search/forward search)

6 ̈ / ̇ FOLDER buttons (album up / down)

7 MUTE button

8 MODE button (repeat / random)

9 Battery compartment

Start-up of the device/Introduction

• Read the operating instructions thoroughly before the

start-up!

• Select an appropriate location for the device, e.g. a

dry, ﬂ at, non-slip surface on which the device can be

easily operated.

• Make sure that the device is adequately ventilated!

• Connect the loudspeakers to the back of the music

centre to the sockets market „Speaker R and L“ (22).

• Insert the plug into a properly installed 230 V, 50 Hz

power socket. The STANDBY (2) control lamp shows

the function. Please ensure that the mains voltage

corresponds to the information on the type plate.

Remote Control Batteries

• Open the lid of the battery compartment (9) on the

back of the remote control.

• Insert 2 microbatteries of type R03 “AAA” 1.5V

(supplied). Ensure that the polarity is correct (see the

ﬂ oor of the battery compartment)!

• Close the battery compartment.

05-MC 1027 CD/MP3 29 11.01.2006, 9:36:50 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic mc 1027 cd mp3 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info