Bedienungsanleitung Clatronic mc 1027 cd mp3 (Seite 30 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

159842

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

• If the remote control is not used for a prolonged pe-

riod, remove the batteries in order to prevent battery

acid leaking.

• Different battery types or new and used batteries

must not be used together.

Warning: batteries are not to be disposed of together

with domestic wastes. Dispose of the used batteries at

the relevant collection bin or at your dealer’s.

Never throw batteries into the ﬁ re.

CD deck transport protection

• Please open the CD compartment (11) by pressing

the PUSH/OPEN button (12).

• Remove the transport protection from the CD player if

present before use.

Headphone Socket (19)

Please use headphones with a 3.5 mm stereo jack

plug; these should be inserted into the

socket. The

loudspeakers are then switched off.

General Operation

POWER (1) (1 on the remote control)

Please turn the device on with the POWER switch. The

STANDBY control lamp goes off.

Switch off

Switch the music centre to standby using the POWER

button (the STANDBY control lamp lights up in red).

BASS BOOST (4)

This is used to amplify the bass sounds. The switch can

be in one of two positions,

ON or OFF.

Volume

You can set the desired volume using the ̆ / ̄ VOLUME

control (5) (2 on the remote control).

Infrared remote control

For operating the music centre from a distance of up to 5

metres without a lead. If the range of the remote control

is reduced, the batteries have to be replaced. During

operation ensure that there is nothing blocking the direct

line between the remote control and the sensor (3) on the

machine.

AUX IN socket (20)

To connect analogue replay devices. Use this jack to

replay sound of other replay equipment such as DVD

players, computers, etc. via the loudspeakers.

1. Please connect the external device with a 3.5 mm

stereo jack plug to the AUX IN socket.

2. Turn the FUNCTION function selector switch (6) to

the AUX position.

3. Through the loudspeakers you will now hear the

sound from the external device. You can adjust the

volume with the VOLUME control (5) (2 on the remote

control). The CD buttons have no function in this

mode.

4. For the remaining procedure please see the operating

instructions of the external sound source.

USB Connection (7)

This device has been developed in accordance with the

latest technical developments in the USB ﬁ eld. Unfortu-

nately the large number of different types of USB storage

media on offer today makes it impossible to guarantee full

compatibility with all USB storage media.

1. In order to switch on the device please press the

POWER switch (1/1).

2. Turn the FUNCTION function selector switch (6) to

the CD position.

3. Connect a USB storage medium.

4. Hold the ̈ II PLAY/PAUSE button (14/3) down for

approx. 3 seconds until the letters USB light up in the

display. The device is now in USB mode. After a few

seconds the total number of songs/tracks is shown in

the display (13).

5. Press ̈ II PLAY/PAUSE (14/3) to play back the music

data.

6. For operating instructions please see the section

“Playing CDs/MP3s”.

7. If the USB connection is no longer required, hold the

̈ II PLAY/PAUSE button (14/3) down for approx.

3 seconds until the letters USB go off in the display.

The device is now in CD mode.

Important: Before you remove the USB storage medium,

turn the device off with the POWER switch (1/1) or turn

the function selector switch (6) to RADIO.

Note: If you have problems with operation using the USB

connection, please use an appropriate adapter cable and

proceed as described under AUX IN.

Listening to the Radio

Press the POWER button (1/1) in order to be able to use

the functions with the device switched on. The STANDBY

light goes off.

1. Turn the FUNCTION function selector switch (6) to

the RADIO position.

2. With the BAND band selector switch (9) you can

select the desired frequency band.

Medium Wave = MW/AM (Mono), VHF = FM,

VHF (Stereo) = FM ST

3. Tune in the desired station with the station adjustment

knob TUNING (8).

4. The ST control lamp

(in the display) only lights

up when you have selected FM stereo and the station

is being received in stereo quality. If reception is too

weak and there is noise on the station being received,

this lamp will ﬂ icker. Try to improve reception by tur-

ning and bending or twisting and altering the length of

the antenna (23). In the case of FM stations you can

use the BAND selector switch (9) to switch between

FM (MONO) and FM ST. (STEREO) reception. Where

reception is bad we recommend switching to MONO.

5. An aerial is integrated into the device for the reception

of AM stations. The machine can be aligned to the

station by turning it. In this frequency band programs

are transmitted in „mono“ only.

05-MC 1027 CD/MP3 30 11.01.2006, 9:36:52 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic mc 1027 cd mp3 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info