Bedienungsanleitung Clatronic mc 1033 cd usb mp3 (Seite 38 von 58) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

160212

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

ENGLISH

29 Pick-up arm support/catch

30 Guide lever

31 Central spindle

32 Turntable

33 Hood

Remote Control

1 INFO button

2 REC button (encoding function)

II button (play/pause)

(stop) button

5 SOURCE button

6 Battery compartment

7 FOLDER

button (album down / album up)

8 I

̇̇

SKIP / SEARCH

̈̈

I buttons

(forward search/ reverse search)

9 REP/INTRO/RAN button (repeat / random)

10 FIND button

11 PROGRAM button

Start-up of the device/Introduction

• Read the operating instructions thoroughly before the start-up!

• Select an appropriate location for the device and loudspea-

kers. An example of an appropriate location is a ﬂ at (hori-

zontal), dry, non-slip surface on which it can be operated

without difﬁ culty.

• Make sure that the device is adequately ventilated!

• Connect the loudspeakers to the back of the music centre to

the sockets market „SPEAKER R and L“ (25).

• Insert the plug into a properly installed 230 V, 50 Hz power

socket. Please ensure that the mains voltage corresponds to

the information on the type plate.

Remote Control Batteries

• Open the lid of the battery compartment on the back of the

remote control.

• Insert 2 batteries of type R03 „AAA” 1.5 V (not supplied).

Ensure that the polarity is correct (see the ﬂ oor of the

battery compartment)!

• Close the battery compartment.

• If the remote control is not used for a prolonged period,

remove the batteries in order to prevent battery acid leaking.

• Different battery types or new and used batteries must not

be used together.

CAUTION:

Batteries are not to be disposed of together with domestic

wastes. Dispose of the used batteries at the relevant collection

bin or at your dealer’s.

WARNING:

Do not expose the batteries to high temperatures or direct

sunlight. Never throw batteries into the ﬁ re. There is a danger

of explosion!

CD deck transport protection

• Please open the CD compartment (17) by pressing the

button (8).

• Remove the transport protection from the CD player if

present before use.

Headphone Socket (20)

Please use headphones with a 3.5 mm stereo jack plug; these

should be inserted into the

„ “ socket. The loudspeakers are

then switched off.

General Operation

ޥ NOTE:

Some keys are to be found both on the device itself and on

the remote control. Keys with the same designation have the

same function.

Switch-off

The machine is switched off when the function selector switch

(16) is turned to the OFF position. The POWER control lamp

goes off. Unplug the device.

Volume

You can set the desired volume using the -/+

VOLUME control

(2). Keep the corresponding button pressed down until the

desired volume has been reached.

Infrared remote control

For operating the music centre from a distance of up to 5 metres

without a lead. If the range of the remote control is reduced, the

batteries have to be replaced. During operation ensure that there

is nothing blocking the direct line between the remote control

and the sensor (14) on the machine.

USB Connexion (19)

This device has been developed in accordance with the latest

technical developments in the USB ﬁ eld. Unfortunately the large

number of different types of USB storage media on offer today

makes it impossible to guarantee full compatibility with all USB

storage media. For this reason there may be problems in rare

cases with playing back from USB storage media. This is not a

malfunction of the device.

1. Turn the function selector switch (16) to the CD/USB/SD

position.

2. Connect a USB storage medium.

3. Press the SOURCE button (3/5). The letters „ “ appear

in the display. The device is now in USB mode. After a few

seconds the total number of folders and songs/tracks is

shown in the display.

4. Press

II (7/3) to play back the music data.

5. For operating instructions please see the section “Playing

CDs/MP3s”.

6. If the USB connection is no longer required, press the

SOURCE button twice (3/5) button twice. The word CD

appears in the display. The device is now in CD/MP3 mode.

CAUTION:

Before you remove the USB storage medium, turn the function

selector switch (16) to TUNER.

05-MC 1033 CD.indd 3805-MC 1033 CD.indd 38 13.11.2007 8:28:49 Uhr13.11.2007 8:28:49 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic mc 1033 cd usb mp3 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info