Bedienungsanleitung Clatronic mc 1033 cd usb mp3 (Seite 39 von 58) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

160212

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

ENGLISH

SD/MMC Card Slot (18)

1. If you would like to play back data on an SD/MMC card,

insert it into the appropriate opening.

2. Press the SD/MMC card into the opening provided until it

clicks into place.

3. Turn the function selector switch (16) to the CD/USB/SD

position.

4. Press the SOURCE button twice (3/5). The letters „

“

appear in the display. The device is now in SD/MMC

mode. After a few seconds the total number of folders and

songs/tracks is shown in the display.

5. Press

II (7/3) to play back the music data.

6. For operating instructions please see the section “Playing

CDs/MP3s”.

7. Is the SD/MMC card slot is no longer required, press the

SOURCE button (3/5) once. The word CD appears in the

display. The device is now in CD/MP3 mode.

8. Press the SD/MMC card again to remove it.

Listening to the Radio

1. Turn the function selector switch (16) to the TUNER position.

2. Select the desired frequency band with the band selection

switch (15).

Medium Wave = AM (Mono);

VHF (Stereo) = FM ST; VHF = FM

3. Tune in the desired station with the station adjustment knob

TUNING (12).

4. The FM ST control lamp (10) only lights up when you have

selected FM stereo and the station is being received in

stereo quality. If reception is too weak and there is noise

on the station being received, this lamp will ﬂ icker. Try to

improve reception by turning and bending or twisting and

altering the length of the antenna (24). Where reception is

bad we recommend switching to FM (Mono).

5. An aerial is integrated into the device for the reception of

AM stations. The machine can be aligned to the station by

turning it. In this frequency band programs are transmitted in

„mono“ only.

Using the Record Player

1. Push the function selection switch (16) to PHONO.

2. Open the hood (33) by pulling the lid on the front upwards.

3. Place a record on the turntable. If you are using a 45 rpm

single, ﬁ rst place the adapter (puck) (26) on the central

spindle.

4. Release the catch on the pick-up arm support (29) and

remove the stylus protector.

5. Select the appropriate speed with the speed selection switch

(28).

6. Use the pick-up lever (27) to raise the pick-up. Guide the

pick-up over the outer edge of the record with the help of the

guide lever (30). The turntable begins to rotate automatical-

ly. Use the pick-up lever again to lower the pick-up.

7. AUTO STOP ON/OFF switch (22): At the end of the record

the turntable stops rotating automatically if you have turned

the AUTO STOP ON/OFF switch on the back of the device

to „ON“.

ޥ NOTE:

With some records it is possible that the turntable stops

rotating before the end of the record is reached as the

switch off end is located outside the radius. In this case

turn the AUTO STOP ON/OFF switch to „OFF“. With the

setting the turntable continues to turn when the pick-up is

still on the pick-up arm support.

8. When you have ﬁ nished listening to records place the pick-

up arm carefully on the support, lock the catch and replace

the stylus protector.

Playing CDs / MP3

This is how you play a CD

1. Turn the function selector switch (16) to the „CD/USB/SD“

position.

2. In order to open the CD compartment, press the

button

(8).

3. Insert a CD with the printed side facing upwards into the CD

compartment and press the

button (8) again in order to

re-close the CD compartment.

4. The word CD appears in the display. The device is now in

CD/MP3 mode.

5. After a few seconds the total number of songs/tracks is

shown in the display.

In the case of a CD in MP3 format the total number of

folders and songs/tracks is shown after a few seconds.

6. Press the

II button (7) (3 on the remote control) in order

to play the CD. The CD will play from the ﬁ rst title. The track

currently being played,

CD or

CD, MP3 are shown in

the display.

7. To remove a CD, press the

key (7) (4 on the remote

control), open the CD deck with the

key (8) and take out

the CD carefully.

Please keep the CD compartment closed at all times.

ޥ NOTE:

• If a disk has being inserted correctly, or if there is no disk

inserted, „CD READ“ ﬂ ashes in the display and the word

„NO DISC“ appears.

• Playback of CDs produced by the user cannot be guaran-

teed due to the large variety of software and CD media

available.

Description of the CD buttons

II (7/3)

You can brieﬂ y interrupt and resume playback using this button.

The playing time that has elapsed ﬂ ashes in the display. Pres-

sing again continues playback.

SOURCE (3/5)

Press this button to switch between the CD/MP3 mode and the

USB/CARD mode. The word CD, „ “ or „ “ appears in the

display.

05-MC 1033 CD.indd 3905-MC 1033 CD.indd 39 13.11.2007 8:28:49 Uhr13.11.2007 8:28:49 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic mc 1033 cd usb mp3 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info