Bedienungsanleitung Clifford Concept 50 (Seite 10 von 23) (Englisch)

468917

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

IMPORTANT: What you MUST do to drive your car

Until you set your own secret disarming code, you will use the factory-set disarming

code, which is the single digit “2.” To drive your car, do the following:

1. Start the engine, then press and release the brake pedal.

2. Within 20 seconds, enter the factory-set code via the rocker switch mounted on your

vehicle’s dashboard or console (you can do this while driving):

a. To enter the factory-set disarming code of “2,” tap the momentary (spring-loaded)

side of the PlainView switch twice.

b. Press the PlainView switch to its other side (latched side), then return the switch

to its center position. You may continue driving.

NOTE: If you wish, you may select to use a remote control button sequence to

disengage the anti-carjacking countdown. A dedicated disarming remote (not

carried on your keychain) is also available. See pages 19–21 for information.

What you MUST do if you forget to enter the disarming code

If you forget to enter the code, Concept 50 will remind you to do so 20 seconds after you

begin driving by “chirping” the siren 5 times and flashing the LED on the dashboard. At this

point, you have another 20 seconds to enter your code. When entered, the LED will stop

flashing. If the proper code is not entered within 20 seconds after the 5-chirp signal, the

engine will shut down. You may enter your disarming code even after the engine is shut

down. Once the proper disarming code is entered, you will be able to resume driving.

How to set your own secret disarming code

Since all Concept 50 systems have the same factory-set disarming code (“2”), it is highly

advisable that you set your own disarming code. You may choose any 1-, 2-, or 3-digit

disarming code so long as it does not have any zeros. You can also change your disarming

code whenever and wherever you want. See User-selectable features on pages 19–21.

Enable/disable anti-carjacking

If you prefer, you may enable or disable the anti-carjacking feature (see User-selectable

features on pages 19–21) or temporarily override it via valet mode (see page 13).

What to do in a carjacking situation

In a carjacking situation, the sooner you are out of the car the better. Don’t resist or take

anything with you, just get out and get away. The instant the car door is opened,

Concept 50 takes charge. First it lets the carjacker drive your vehicle a short distance,

ensuring your safety. Then it flashes the brake/hazard lights to call attention and caution

drivers behind your vehicle that it is about to stop. It then sounds the Medallion Siren

and waits for the carjacker to slow for a turn or traffic, at which point it shuts down the

engine and dynamically prevents it from being restarted. If the carjacker tries to use the

PlainView switch to enter code combinations at random, the system will lock out for

two minutes after three incorrect tries. Even if he stumbles onto the correct code, the

carjacker is still locked out. Unable to restart the vehicle, and with the siren wailing and

brake lights flashing, the carjacker has no choice but to speedily abandon the vehicle.

You simply walk a block or two to your car, enter your secret code, and the system

releases control of the vehicle to you.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clifford Concept 50 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info