Bedienungsanleitung Clifford Concept 50 (Seite 11 von 23) (Englisch)

468917

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Your 4-button/12-channel remote controls

The 4-button/12-channel remote control is an ultra-sophisticated miniature radio

transmitter powered by a tiny 12-volt battery. The range is up to 100 feet. Obstructions,

electrical interference, weather conditions or a weak battery will reduce the range. Your

4-button/12-channel remote control is the key to your Concept 50. It incorporates

Clifford’s proprietary Anti-Code- Grabbing™ (ACG) technology with Random Code

Generation for the ultimate in protection against “code-grabbing” devices (see page 12).

You will use the remote to arm and disarm the system, lock and unlock the doors,

activate the system’s panic feature, adjust sensor sensitivity, activate the headlights,

control Remote QuickAccess features or command options such as remote trunk release,

remote memory seat adjustment and even remote starting of the engine and heater or air

conditioner, among other available options.

How to use your keychain

remote control

Your remote control can

individually command up

to 12 different system

functions and options. It’s

like having a TV with 12

channels. You change

channels (functions) with

your keychain remote

control. But instead of

putting 12 buttons on the

remote control, we made it

easy: First, the button you

use the most — button 1 to

arm, disarm,lock and unlock the doors — is larger than the others. Buttons 2, 3 and 4 are

the smaller buttons to the right, below and left of button 1. The LevelShift button on the

side permits you to select channels 5–12 with the same four buttons.

To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For

instance, to transmit channel 3, press button 3. While you transmit, the LED

indicator will blink once every second: this indicates level 1.

To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This shifts

buttons 1–4 to level 2 (channels 5–8). Then press the desired button

within the next

7 seconds

. For instance, to transmit channel 5, press the LevelShift button once,

then press button 1. While you transmit, you’ll notice that the LED indicator

blinks twice, pauses, blinks twice, etc.: this indicates level 2.

To transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This shifts

buttons 1–4 to level 3 (channels 9–12). Then press the corresponding button within

the next 7 seconds. For instance, to transmit channel 10, press the LevelShift button

twice, then press button 2. While you transmit, you’ll notice that the LED blinks

three times, pauses, blinks three times, etc.: this indicates level 3.

NOTE: One second after you stop transmitting level 2 or level 3 (channels 5–12), the

remote control automatically returns to level 1 (channels 1–4).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clifford Concept 50 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info