Bedienungsanleitung Cobra 8500 PRO HD (Seite 9 von 21) (Englisch)

538809

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

12.

13.

Current Location

Tap this button to ﬁnd details about your current location.

You will need a valid GPS signal to get accurate and current

positioning information.

The following details are listed:

• Nearest Address;

• Nearest Intersection;

• Latitude and Longitude;

• Map of your current location.

You may save this location as a favorite.

Tap this button to center the map to your current location.

Tap this button to search for the nearest emergency POIs.

Select the emergency POI category (Hospital, Fuel, Police, Auto, ATMs), a list

of the nearest POIs for that category will then be displayed, simply choose the

desired POI from the list and the route to the POI will be calculated.

Coordinates

Enter coordinates to route to an exact location on the map.

There are two steps involved in entering coordinates. You must ﬁrst enter the

Latitude and then the Longitude. The navigation application supports several

coordinate formats. Choose the format that you prefer.

Step 1

Enter the Latitude in one of the formats

supported.

Step 2

Enter the Longitude in one of the formats

supported.

The application shows a map of the

location and an address, if available, at

the top of the screen.

Tap this button to center the map to your current location.

Tap this button to search for the nearest emergency POIs.

Note: See the on-screen examples to ensure the coordinate you enter is in

a valid format.

Multi Route

Save and restore commonly used routes.

The Multi Route interface allows you to save and restore routes that you

commonly use.

When Multi Route is opened you will see a list of any saved routes that you

currently have (the ﬁrst time you use the device this list will be empty).

To load a route simply select it from the list and tap NEXT the route will now be

calculated and you will be guided to your destination (or ﬁrst waypoint in route).

To save a route to the Multi Route list tap CREATE ROUTE and then tap

[ADD], you can then add locations to your route as required. Once you have

added all the required locations to your route, tap NEXT and you will be

prompted to enter a name for your route, tap NEXT when you have entered

the name for your route, your route will then be saved to the Multi Route list,

the route preview screen will then be displayed to provide an overview of your

route details.

Map View

Tap a point on the map to choose a location as your destination. The address

of the point you choose is displayed in a grey information box directly above

the point you chose.

Route: Choose to add the location as a Start point, Waypoint, or destination.

More: Tap the MORE button to:

• Save the location as a Favorite, or

• Search for a POI nearby this location.

Note: If you would like to save your current active route to Multi Route you

can use the SAVE function in My Route > Edit Route.

8500PROHD_MANL.indd 9 10/24/13 3:25 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cobra 8500 PRO HD Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info