652338
16
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
16 Operation
4.4.3 Draining of the steam cylinder
To perform a draining of the steam cylinder proceed as follows:
1. Press on the <Drain> button in the standard operating display. The "Manual" submenu appears.
2. In the "Manual" submenu press on the button of the cylinder(s) to be drained (<Cylinder A>, <Cyl-
inder B> or <Cylinder A/B>).
Note: on single units <Cylinder A> button is shown only.
3. Press on the <Yes> button to start the draining of the steam cylinder(s). A possible running hu-
midication process is interrupted, then the drain pump starts and empties the steam cylinder. The
progress bar in the display shows the current status of the drain cycle. After draining has nished
the unit returns to the "Manual" submenu.
Note: in order to stop the drain cycle press the <Cancel> button in the draining progress window.
The drain cycle is stopped and the unit returns to the "Manual" submenu.
4. If you have to carry out work on the Condair RS, switch off steam humidier via the unit switch.
Otherwise the steam cylinder is immediately lled again.
4.4.4 Flushing the Condair RO-A water supply system
Note: the RO ushing function in the "manual" submenu appears only, if the Condair RS is connected
to a Condair RO-A reverse osmosis system and if the reverse osmosis system was activated in the
factory menu.
To ush the RO water supply system proceed as follows:
1. Press on the <Drain> button in the standard operating display. The "Manual" submenu appears.
2. Press on the <Flush> button in the "Manual" submenu.
3. Press on the <Yes> button to start the ushing of the water supply system. The progress bar in the
display shows the current status of the ush cycle. After ushing has nished the unit returns to
normal operating mode.
Note: in order to stop the ush cycle press the <Cancel> button in the draining progress window.
The ush cycle is stopped and the unit returns to normal operating mode.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Condair RS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Condair RS

Condair RS Installationsanweisung - Englisch - 80 seiten

Condair RS Bedienungsanleitung - Holländisch - 80 seiten

Condair RS Installationsanweisung - Holländisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info