652338
72
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
72 Fault elimination
Code Message Information
Warning Fault Possible causes Remedy
––– E47 Invalid Level Invalid level detected, humidication is stopped!
Note: As soon as the level is within the valid range again, the Condair RS con-
tinuous normal operation.
Magnetic eld in vicinity of level unit. Eliminate magnetic eld.
Level unit defective. Replace level unit
––– E52 ** Unstable Level Unstable level detected, humidication is stopped
Check hose connections between level
unit and steam cylinder receptacle and
between level unit and steam outlet
hose.
Check/clean hose connections, clean
if necessary.
––– E56 Int. Safety Loop Internal safety loop interrupted, humidication is stopped!
Note: As soon as the internal safety loop is closed again, the Condair RS
continuous normal operation.
Connection between heating cable
plug and electronic interrupted.
Let have the heating cable plug and
cable connections to heating cable
plug socket be checked by an electri-
cian.
––– E57 Activation Activation code has not been entered yet.
Activation code has not been entered
yet.
Enter activation code (code available
from your Condair representative).
––– E58 No Water Pressure Not implemented yet.
––– –––
E60, E61,
E62, E73
––– See malfunction list in the Condair RO-A installation and operation manual.
––– E74 ** Keep Alive Communication between control board and driver board interrupted.
Driver board not connected. Correctly connect driver board.
Wrong driver board installed. Install and connect correct driver board.
Driver board defective. Replace driver board.
E80 USB Logger USB data logger fault.
USB data logger not connected or
defective.
Check/replace USB data logger.
––– E82 ** Driver Missing Communication with driver board interrupted.
RS485 Bus to driver board interrupted. Contact your Condair representative.
––– E83 ** Slave Address The driver board of the slave unit has a wrong address. The control can not
differ between Master and Slave.
Rotary switch on the driver board of the
slave unit set wrong.
Set rotary switch on the driver board of
the slave unit to position "1".
––– E84 ** Driver defective Unknown fault on driver board
Driver board defective. Let have the driver board be replaced
by an electrician.
––– E85 ** Driver ID wrong Driver board ID wrong.
Wrong driver board connected or SAB
address wrong.
Contact your Condair representative.
––– E86 ** Driver Incompatible Wrong version of driver board.
Wrong version of driver board. Contact your Condair representative.
––– E87 ** Local 24VSupply Local 24V voltage on driver board out of valid range!
Short circuit on supply module or supply
module defective.
Contact your Condair representative.
––– E88 ** Local 5V Supply Local 5V voltage on driver board out of valid range!
Short circuit on supply module or supply
module defective.
Contact your Condair representative.
––– E89 ** Local Ref Supply Local reference voltage out of valid range!
DC supply faulty or supply line inter-
rupted.
Contact your Condair representative.
E90 –––
See malfunction list in the Condair RO-A installation and operation manual.
72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Condair RS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Condair RS

Condair RS Installationsanweisung - Englisch - 80 seiten

Condair RS Bedienungsanleitung - Holländisch - 80 seiten

Condair RS Installationsanweisung - Holländisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info