Light Fan settings
Off
On
Low
Off
High
Different grease filters can be used to
absorb the grease particles in the
kitchen vapours.
Fleece grease filter:
The filter mat consists of highly flammable
material.
Warning:
A build up of greasy residue increases flam-
mability, and the function of the
extractor hood may be impaired.
Important:
Replace the fleece grease filter in good
time, otherwise there is a risk of fire from
the heat which accumulates during deep-
fat frying or roasting.
Replacing the fleece grease filter:
KDuring normal operation (daily 1 to 2
hours) the fleece grease filter must be
replaced every 8 to 10 weeks.
Replace printed fleece grease filters at
the latest when the coloured print
dissolves.
KUse only original filters.
These comply with the safety regulations
and ensure optimum function.
Disposal of the old fleece grease filter:
KFleece grease filters do not contain any
harmful substances. They can be
disposed of as bio-degradable waste.
Filters and maintenance
Removing and installing the metal filter:
1. Press in the interlocks on the left and
right sides of the filter grille.
2. Remove the filter grille.
Filters and maintenance
3. Remove the wire grille and the saturated
filter mats.
4. Clean the filter grille and insert a new
filter mat.
5. Clamp the filter mat with the wire grille.
6. Re-insert the filter grille.
몇The interlocks must lock into position
on the left and right sides.
Metal grease filter:
The filter mats consist of non-flammable
material.
Warning:
A build up of greasy residue increases flam-
mability, and the function of the
extractor hood may be impaired.
Important:
Replace the metal grease filter in good time,
otherwise there is a risk of fire from the heat
which accumulates during deep-fat frying or
roasting.
Cleaning the metal grease filters:
KIn normal operation (1 to 2 hours daily),
the metal grease filter must be cleaned
1 x a month.
KThe filters can be cleaned in a dish-
washer. It is however possible that they
will become slightly discoloured.
KThe filter must be placed loosely, and
NOT wedged, in the dishwasher.
Important:
Metal filters that are saturated with
grease should not be washed together
with other dishes etc.
KWhen cleaning the filters by hand, soak
them in hot soapy water first of all.
Do not use aggressive, acidic or caustic
cleaners.
Then brush the filters clean, rinse them
thoroughly and leave the water to drain
off.
Removing and installing the metal filter
(See details for removing/inserting the
fleece filter):
1. Clean the filter grille and the filter mats.
2. Re-insert the cleaned filter mats and
clamp them with the wire grille.
Ensure that there is no gap in the middle.
Activated carbon filter:
For binding the odorous substances in
circulating-air mode.
(See details for removing/inserting the flee-
ce filter.)
1. Insert the screws through the wing nuts
and sleeves and screw the screws into
the left and right sides of the intermediate
base (required only during the initial
installation). Screws, wing nuts and
sleeves are enclosed with the
activated carbon filter –.
2. Using a screwdriver or similar tool, press
the two lugs on the housing inwards
(required only during the initial installation).
