33
Filters and maintenance
3. Insert the activated carbon filter at the
rear, fold up and lock into position on the
left and right with the wing nuts.
몇The lugs on the left and right sides
of the activated carbon filter are folded in
for the 50 cm wide extractor hood.
They must be folded up for the 60 cm
and 90 cm wide extractor hoods.
Replacing the activated carbon filter:
KDuring normal operation (daily 1 to 2
hours) the activated carbon filter must be
replaced approximately 1 x year.
KThe activated carbon filter can be pur-
chased FROM YOUR DEALER (see
Optional accessories).
KUse only original filters.
These ensure optimum function.
Disposal of the old activated carbon
filter:
KActivated carbon filters do not contain
any harmful substances. They can be
disposed of as residual waste.
Replacing the light bulbs
1. Switch off the extractor hood and isolate
the extractor hood by pulling out the
mains plug or switching off the fuse.
2. Remove the grease filter
(see Filters and maintenance).
3. Replace the bulb (standard filament bulb,
max 40 W, E14 bulb holder).
4. Re-insert the grease filters.
5. Reconnect the power by inserting the
mains plug or by switching on the fuse.
Cleaning and care
Isolate the extractor hood by pulling out
the mains plug or switching off the fuse.
몇Do not clean the extractor hood with
abrasive sponges or with cleaning agents
which contain sand, soda, acid or chlorine!
KClean the extractor hood with a hot soap
solution or a mild window cleaner.
KDo not scrape off dried-on dirt but wipe
off with a damp cloth.
KWhen cleaning the grease filters, remove
grease deposits from accessible parts of
the housing. This prevents the risk of fire
and ensures that the extractor hood
continues operating at maximum
efficiency.
KNote: Do not use alcohol (spirit) on
plastic surfaces, as dull marks may
appear.
Caution: Ensure that the kitchen is ade-
quately ventilated. Avoid naked flames!
몇Clean the operating buttons with a mild
soapy solution and a soft, damp cloth only.
Do not use stainless-steel cleaner to clean
the operating buttons.
Stainless steel surfaces:
KUse a mild non-abrasive stainless steel
cleaner.
KClean the surface in the same direction
as it has been ground and polished.
KWe recommend our stainless steel
cleaner no. 461731.
See enclosed service booklet for order
address.
Aluminium and plastic surfaces:
KDo not use dry cloths.
KUse a mild window cleaning agent.
KDo not use aggressive, acidic or caustic
cleaners.
Observe the warranty regulations in the
enclosed service booklet.
