Bedienungsanleitung Constructa CD669862 (Seite 13 von 32) (Deutsch, Englisch, Holländisch, Französisch)

596538

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It is

possible that individual features are described which do not

apply to your appliance.

: Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months.

Never operate the appliance without the grease filter.

Notes

■ Do not use any aggressive, acidic or alkaline cleaning

agents.

■ When cleaning the metal mesh grease filters, also clean the

holder for the metal mesh grease filters in the appliance

using a damp cloth.

■ The metal mesh grease filters can be cleaned in the

dishwasher or by hand.

By hand:

Note: You can use a special grease solvent for stubborn dirt. It

can be ordered via the Online Shop.

■ Soak the metal mesh grease filters in a hot soapy solution.

■ Clean the filters with a brush and then rinse them thoroughly.

■ Leave the metal mesh grease filters to drain.

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has no effect

on the function of the metal mesh grease filters.

■ Do not clean heavily soiled metal mesh grease filters together

with utensils.

■ Place the metal mesh grease filters loosely in the dishwasher.

The metal mesh grease filters must not be wedged in.

Removing metal grease filter

1. Fold the filter cover upwards.

Notes

■ The opening angle of the filter cover is restricted to approx.

80°. Do not open the filter cover any further, otherwise the

hinges may be damaged.

■ The filter cover locks in any position.

2. Remove the two metal grease filters under the filter cover and

the metal grease filter on the underside of the appliance.

Unfasten the lock, fold the metal filter forwards and remove it

from the bracket.

Note: Grease can accumulate at the bottom of the metal

grease filter. Hold the metal grease filter level, otherwise

grease will drip out.

3. Clean the metal grease filter.

4. After removing the filters, clean the inside of the appliance.

5. Clean the filter cover.

Installing the metal mesh grease filter

1. Insert the two metal grease filters under the filter cover with

the lock facing downwards.

Insert the metal grease filters on the underside of the

appliance.

2. Fold the metal grease filters inwards, locking them in place.

3. Close the filter cover.

Changing the activated charcoal filter (only in

circulating-air mode)

In order to guarantee efficient odour filtration, the filter must be

serviced regularly.

The activated charcoal filters must be replaced at least every

4 months.

Notes

■ The activated charcoal filters are not included in the delivery.

The activated charcoal filters can be obtained from specialist

retailers, from our after-sales service or from the Online Shop.

■ The activated charcoal filters cannot be cleaned or

reactivated.

1. Remove metal grease filter: See above.

2. Turn the old activated charcoal filter and pull away from the

bracket. ¨

3. Push the new activated charcoal filter onto the bracket and

turn. ©

4. Fit the metal grease filter: See above.

Area Cleaning agents

Stainless steel Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth.

Clean stainless steel surfaces in the

direction of the grain only.

Special stainless steel cleaning prod-

ucts are available from our after-sales

service or from specialist retailers.

Apply a very thin layer of the cleaning

product with a soft cloth.

Painted surfaces Hot soapy water:

Clean using a damp dish cloth and dry

with a soft cloth/towel.

Do not use any stainless steel cleaners.

Aluminium and plas-

tic

Glass cleaner:

Clean with a soft cloth.

Glass Glass cleaner:

Clean with a soft cloth. Do not use a

glass scraper.

Operating controls Hot soapy water:

Clean using a damp dish cloth and dry

with a soft cloth.

Risk of damage to the electronics from

penetrating moisture. Never clean oper-

ator controls with a wet cloth.

Do not use any stainless steel cleaners.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CD669862 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info