Bedienungsanleitung Constructa CF234653 (Seite 29 von 48) (Englisch, Holländisch)

542391

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Heating indicator

The heating indicator displays the rising temperature in the

cooking compartment.

■ Temperature reached (figure A)

■ Appliance reheating (figure B)

Switching off the appliance

Turn the operating mode selector to the Û position. The

appliance is switched off.

The appliance has a cooling fan. After the appliance is switched

off, the cooling fan may continue to run.

You can see in the temperature display whether there is high or

low residual heat in the cooking compartment.

Changing the basic settings

Your appliance has various basic settings, which are preset at

the factory. You can, however, change these basic settings as

required.

The appliance must be switched off and controls must not be

locked.

1. Press and hold the ± info button for 3 seconds to go to

the basic settings menu.

In the temperature display, ™‚‹ appears.

2. Press the ± info button briefly and repeatedly until the setting

symbol for the current basic setting of a submenu is

displayed in the temperature display (e.g. ™„ƒ).

3. Using the temperature selector, set the required basic setting

within a submenu (e.g. ™„„).

4. Press and hold the ± info button for 3 seconds.

Your basic setting is saved.

You can change the following basic settings:

Automatic safety cut-out

The automatic safety cut-out is activated if your appliance is

switched on and you have not made any settings for a long

time.

The length of time after which your appliance switches itself off

depends on the settings that you make.

‹‹‹ flashes in the temperature display. Appliance operation is

interrupted.

Turn the operating mode selector to the Û position to deactivate

it.

Electronic clock

In this section, you can read about

■ how to set the timer

■ how to switch off your appliance automatically

■ how to switch your appliance on and off automatically

(preset operation)

■ how to set the time

■ find out how to activate rapid heat up

Clock display

Temperature dis-

play

Meaning

• Residual heat high (above 120 °C)

œ Residual heat low (between

60 °C and 120 °C)

$ %

Basic settings menu

Submenu Basic setting Setting

symbol

Childproof lock Appliance controls

unlocked

™‚‹

Appliance controls locked ™‚‚

Appliance controls perma-

nent lock

™ƒ‚

Audible signal Audible signal off ™„‹

Audible signal 30 seconds ™„‚

Audible signal 2 minutes ™„ƒ

Audible signal 10 minutes ™„„

&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU

Clock function Use

Q Timer You can use the minute minder as an egg timer or a kitchen timer. The appliance does

not switch on or off automatically

x Cooking time The appliances switches off automatically after a cooking time setting has elapsed

(e.g. ‚:„‹ hours)

y End of operation The appliance switches off automatically at a set time (e.g. ‚ƒ:„‹ )

Preset operation The appliance switches on and off automatically. Cooking time and end of operation

have been combined.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CF234653 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Constructa CF234653

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info