Bedienungsanleitung Constructa CF234653 (Seite 30 von 48) (Englisch, Holländisch)

542391

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Notes

■ Between the times ƒƒ:‹‹ and †:†Š the clock display is

dimmed if you do not make any settings in that period or no

clock function is activated.

■ When you set a clock function, the time interval increases

when you set higher values (e.g. cooking time up to‚:‹‹œ to

the minute, using ‚:‹‹œ

to the nearest 5 minutes).

■ For the Q minute minder, x cooking time, y end of

operation and preselection mode clock functions, a signal

sounds when the settings have elapsed and the Q or y

symbol flashes. To cancel the audible signal before it ends,

press the KJ clock function button.

■ Briefly press the KJ clock function button to select a clock

function. You then have 3 seconds to set the selected clock

function. After this time, the setting mode is exited

automatically.

Switching the clock display on and off

1.Press and hold the KJclock function button for 6 seconds.

The clock display switches off. If a clock function is active,

the associated symbol remains lit.

2.Press the KJclock function button briefly.

The clock display switches on.

Timer

1.Press the KJclock function button repeatedly until the KJ

and Q symbols light up.

2.Set the duration using the rotary selector (e.g. †:‹‹ minutes).

The setting is applied automatically. Then the clock is

displayed again and the minute minder starts counting down.

Cooking time

Automatic switch-off after a cooking time setting has elapsed.

1.Set the operating mode and temperature.

The appliance heats up.

2.Press the KJclock function button repeatedly until

the KJand x symbols light up.

3.Set the cooking time with the rotary selector

(e.g. ‚:„‹ hours).

The setting is applied automatically. The time is then

displayed again and the set cooking time counts down.

Once the cooking time has elapsed, the appliance switches off

automatically.

1.Turn the operating mode and temperature selector back to

the Û position.

2.Press the KJ clock function button to exit the clock function.

End of operation

Automatic switch-off at a set time.

1.Set the operating mode and temperature.

The appliance heats up.

2.Press the KJclock function button repeatedly until the KJ

and y symbols light up.

3.Set the end of operation using the rotary selector

(e.g. ‚ƒ:„‹ o'clock).

The setting is applied automatically. The clock is then

displayed again.

The appliance switches off automatically at the time set for the

end of operation.

1.Turn the operating mode and temperature selector back to

the Û position.

2.Press the KJ clock function button to exit the clock function.

Preset operation

The appliance switches on automatically, then switches off

automatically at the time preselected for the end of operation.

To set this function, combine the cooking time and end of

operation clock functions.

Bear in mind that food which spoils easily should not be left in

the cooking compartment for too long.

1.Set the operating mode and temperature.

The appliance heats up.

2.Press the KJclock function button repeatedly until

the KJand x symbols light up.

3.Set the cooking time with the rotary selector

(e.g. ‚:„‹ hours).

The setting is applied automatically.

3 Clock Setting the clock

f Rapid heat up Shortens the heat up time

Clock function Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CF234653 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Constructa CF234653

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info