Bedienungsanleitung Constructa CH110253 (Seite 41 von 52) (Deutsch, Englisch, Holländisch, Französisch)

596514

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Inserting accessories

The accessories are equipped with a locking function. The

locking function prevents the accessories from tilting when they

are pulled out. The accessories must be inserted into the

cooking compartment correctly for the tilt protection to work

properly.

When inserting the wire rack, check

■ that the lug (a) is pointing downwards

■ that the lug (a) is in the rear part of the wire rack

When inserting the baking tray or the universal pan, check

■ that the lug (a) is in the rear part of the of the accessory

■ that the sloping edge of the accessory faces towards the

appliance door when it is inserted

Shelf positions

The cooking compartment has four shelf positions. The shelf

positions are counted from the bottom up.

Optional accessories

You can purchase optional accessories from the after-sales

service or specialist retailers.

Before using the appliance for the first time

Clean your appliance before using it for the first time.

1. Remove accessories and any remaining packaging from the

cooking compartment.

2. Clean the accessories and cooking compartment with hot

soapy water (see section: Cleaning and care).

3. Heat with % Top/bottom heat at 240°C for 60 minutes.

4. Afterwards, wipe the cooled cooking compartment with hot,

soapy water.

5. Clean the outside of the appliance with a soft, damp cloth

and soapy water.

Operating the appliance

In this section, you will find out how to switch your appliance on

and off, and how to select an operating mode and temperature.

Switching on the appliance

Oven lighting

Turn the operating mode and temperature selector clockwise to

the \ position to switch on the oven lighting.

Top/bottom heating

Turn the operating mode and temperature selector clockwise to

the required temperature to switch on the Top/bottom heating

operating mode.

Top heating

Turn the operating mode and temperature selector clockwise to

the # position.

Bottom heating

Turn the operating mode and temperature selector clockwise to

the $ position.

The r indicator light lights up while the appliance is heating up

and during any subsequent heating.

Switching off the appliance

1. Turn the operating mode selector back to the Û position.

2. Turn the temperature selector back to the Ú position.

After the appliance is switched off, the cooling fan may

continue to run.

Accessories Order no.

Baking tray, aluminium CZ 1332 X0

Baking tray, enamelled CZ 1342 X0

Universal pan with wire insert CZ 1242 X1

Wire insert for roasting and grilling, to be

used in the universal pan

740766

Baking and roasting wire rack CZ 1432 X1

Pizza tray CZ 1352 X0

System steamer CZ 1282 X3

Telescopic shelf x2 CZ 1702 X2

Telescopic shelf x3 CZ 1742 X2

Telescopic shelf with full extension x4 CZ 1755 X2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Constructa CH110253 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info