COWON D2 – Specification
Supported
File Types
Music MP3 : MPEG 1/2/2.5 Layer 3, ~320kbps, ~48kHz, mono/stereo
WMA : ~256kbps, ~48kHz, mono/stereo
OGG : ~Q10, ~44.1kHz, mono/stereo
FLAC : Compression Level 0 ~ 8, ~44.1kHz, mono/stereo
WAV : ~48kHz, 16bit, mono/stereo
JetEffects(BBE, Mach3Bass, 3D Surround, Stereo Enhance, MP Enhance)
Video AVI : MPEG4 ~ 2Mbps, 320x240, 30fps, MP3 audio
WMV : WMV9 ~ 768kbps, 320x240, 30fps, WMA audio
TV OUT (TV OUT cable sold separately)
Record WMA : 32 ~ 256kbps recording and playback
Voice, Line-In, External Mic
Picture JPG
No limit on file size
Text TXT file Viewer
Supports Max. 2MB
Max. numbers 500 folders / 5,000 files
Radio
FM RADIO : 76Mhz ~ 108Mhz, 87.5Mhz ~ 108Mhz
WMA : 32~256kbps Recording
Display
2.5 inches 1.6M color TFT-LCD – QVGA (320x240)
Touchscreen
Internal
Memory
2GB, 4GB
External
Memory
1 Memory Slot for SD Card or MMC Card
PC Interface
USB 2.0 High Speed
File Transfer
Speed
Max. 35Mbps (Upload Max. 40Mbps)
Battery
Internal Lithium Polymer battery
Battery Life
Movie : Max. 10 hours of continuous play
Audio: Max. 52 hours of continuous play
Charging Time
Power adapter: ~3.5 hrs, USB: ~7 hrs
Buttons
3 buttons (MENU, VOL-, VOL+), POWER & HOLD Switch
SNR
95dB (A-Weighted)
Tunable
Frequencies
20Hz~20KHz
Sound Output
16 Ohm Earphone : 37mW + 37mW
Dimensions
78 X 55.4 X 16.6 mm (LxHxD)
Weight
91g (Including the battery)
- The battery life is as tested under COWON’s standard testing settings and can vary for individual uses.
1. Specification
Additional Information
2. Setting to Factory Default Values
Additional Information
COWON D2 can be returned to its original factory settings. Resetting will erase all the currently set
values for settings and will return them to the values pre-set at the factory.
1. Turn on the power
2. At the Mode Selection screen, follow the steps shown below.
3. Next time a power is turned on, the language selection screen will appear.
- If the product does not function properly, before setting it to its factory default values, please press “RESET”
button at the bottom of D2. If problem persists, then set it to the factory default values.
