651250
44
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
Troubleshooting and Support
This chapter provides solutions to issues that may be encountered during the installation or usage of
your Sound BlasterAxx.
1. The Sound BlasterAxx AXX 200 does not power on.
The AXX 200 is designed to be powered on simply by the built-in battery. Make sure that the built-in
battery is charged.
It can also be powered on by connecting to a PC/laptop via USB or through a physical power socket
using a USB Power Adapter.
If you are connected via USB, please ensure that the connected computer has recognized your AXX 200
correctly. If not, please follow the steps below in order until the issue is corrected.
i. Tighten the USB connection at both ends of the cable.
ii. The USB cable may be faulty. Replace the cable with a working USB cable.
iii. Your computer's USB port may be disabled, or faulty or requires a driver update. Check your
computer's hardware device manager to determine the working status of your USB port. Enable
your USB port and/or update its driver.
If the problem persists, connect the AXX 200 to a different USB port.
If you are connected via a USB Power Adapter, please check that all cables are tightly connected and
the power socket is turned on.
2. I am having difficulty in linking up my Bluetooth device with AXX 200.
Ensure that your Bluetooth enabled device supports A2DP profile.
Please also try the following steps:
l Make sure that Bluetooth is enabled (turned on) on your device.
l On some devices, ensure that the SB AXX 200 is selected as the default headset / wireless stereo
audio playback device.
l Make sure that there are no other wireless devices within a 10 meter radius when pairing.
l Position them within 1 meter or closer to each other if you experience pairing difficulties.
l Check if you have input the correct passcode/pin number (0000) on your Bluetooth device.
l Ensure that both, your Bluetooth device and AXX 200 are not connected to any other devices.
l Restart your Bluetooth device or pair the devices again.
3. I wish to pair my mobile device with AXX200 using NFC.
Ensure that your mobile device is NFC-enabled.
l Turn on the NFC feature on your mobile device.
l Check the AXX 200 to ensure it is turned on.
l Tap your mobile device to the AXX 200 to pair the devices.
l Play songs from your mobile device via the AXX 200.
4. Bluetooth link is established and paired between the devices but theres no music.
Ensure that the device’s volume is not set to minimum or muted. With some built-in Bluetooth enabled
computers or 3rd party USB Bluetooth dongles, you may be required to manually specify/set-up the
audio output as the Sound Blaster AXX 200 (under sound and audio devices section) on your computer’s
operating system.
Note:
Troubleshooting and Support 43
44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Creative Sound Blaster Axx AXX 200 - SB1530 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info