651250
45
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
Audio transmitted from your Sound BlasterAxx may be slightly delayed; this is due to the
characteristics of Bluetooth technology.
5. There is no audio output from the AXX 200.
Please check the following:
l Headphones are not connected to the AXX 200. Connecting headphones automatically mutes the
speaker.
l Unplug the USB cable from the computer and plug it in again.
l Check the volume level of the AXX 200 for the following:
l Speaker Mute LED on the touchscreen is not lighted.
l Master volume and mute icon on the software is at the appropriate level.
l The appropriate channel(s) and output types on the Mixer settings interface is not 0.
6. There is distortion during audio playback.
Please check the following:
l Go to Control Panel >Sound > Recording tab. Ensure that Internal Microphone is being
selected.
l By default, the recording device is set to Internal Microphone. If you have changed the default
recording device to an external microphone, ensure that you select it back to the internal
microphone before removing the AXX200 from your computer OR restart the Sound BlasterAxx.
7. No sound from headphones.
Please check the following:
l Headphones are securely connected to the headphone jack.
l Headphones is recognized as the output device in the Speakers/Headphones interface on the
Control Panel.
8. Unable to record using the built-in microphone.
Please check the following:
l The microphone is not disabled or muted. That is, the microphone mute LED on the touchscreen is
not lit.
l Microphone volume and the volume of other recording devices on the Mixer settings interface is not
at 0.
l Navigate to Control Panel >Sound > Recording tab. Right-click on the recording endpoint to
view its Properties. Ensure that the Listen to this device option is disabled.
9. Unable to hear instant playback from external microphone.
The AXX 200 is equipped with What U Hear and Wave/Aux/Mic Mix features that allows you to
record whatever you say into your external microphone and hear it played back instantly. To ensure
that the this feature works however, first ensure that the correct microphone input is unmuted by
following the steps below.
i. Launch the Sound BlasterAxx Control Panel and select Mixer.
ii.
Check to ensure that the Microphone option is not muted.
Troubleshooting and Support 44
45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Creative Sound Blaster Axx AXX 200 - SB1530 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info