Bedienungsanleitung Cressi NEWTON (Seite 4 von 23) (Englisch)

618072

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

cressi.com

IMPORTANT: please use the most conservative safety factor (SF1 and SF2) any time you are aware of factors

that might increase the risk of decompression sickness. By doing so, you will dive in and safe way.

REMARK: in case of air travel, the device must be stored in the pressurised cabin.

REMARK: Cressi reminds that all sport dives must be conducted within the no decompression limits and at a

maximum depth of 40 m, limit of sport dives. Exceeding these limits dramatically increases the possibility of

decompression sickness.

As a result of technological advancements, Cressi reserves the right to modify the device without prior

notification.

Introduction.

The computer-watch Newton by Cressi is a recreational advanced tool. It will provide all the necessary

information as regards depth, dive times, possible need of decompression, ascent rate and all the surface

intervals between dives. Nitrogen absorption and release is continuously processed by its sophisticated

software, taking into account the quantity of inert gas contained in the different mixtures that can be used. This

information is shown on the device's display thanks to the PCD (Priority Compartment Digit Display) system

that allows an easy and direct "dialogue" between the diver and the computer, ensuring a clear understanding

of all the data needed at any given time and a perfect readability in any situation. The computer is provided with

clock, chronograph and calendar and a versatile dive memory (logbook). The mathematical model of Newton

can make saturation and desaturation calculations of dives carried out both with air and with nitrox in any

moment of the dive. In this last case you can set all the parameters related to the mixture of our dive: from the

maximum allowed PO2 value (between 1.2 bar and 1.6 bar), to the mixture's oxygen percentage (FO2):

between 21% and 99% of O2. Additionally, the device may be set by the user for either metric (m-ºC) or feet

system (ft- ºF).

Newton dive computer-watch can be connected to a personal computer by means of the Cressi interface

(accessory) and the related software (accessory). It is very important to carefully read this user manual and to

perfectly understand the meaning, otherwise serious damage can be caused to your health. This manual is

intended to guide the user to comprehend all the functions of the computer before using it in diving. The default

setting on the Cressi Newton computer-watch is the clock function. To switch to the dive computer, if it was not

specially locked, press and hold the MODE button or scroll up to the ENTR DIVE menu. While submerged, the

dive computer is automatically activated at depths greater than 1.2 m. When the dive computer is enabled, the

display shows the PRE-DIVE mode and the different functions are set through the use of buttons, as explained

below.

In order to understand all the computer's functions and their meaning, the manual is divided into five main

chapters, dealing with every possible use:

1 - General instructions and safety measures

2 – Computer control

3 – Before diving

4 – While diving

5 – On surface after diving

6 – Care and maintenance

INDEX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cressi NEWTON Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info