Bedienungsanleitung Cressi NEWTON (Seite 5 von 23) (Englisch)

618072

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

cressi.com

COMPUTER CONTROL

OPERATION OF NEWTON COMPUTER-WATCH

CLOCK

Newton has a very intuitive display, designed to "support" the diver during any operation. It has four

buttons around it, two on the upper side (LIGHT and MODE) and two on the lower side (DOWN and UP),

with which the instrument is controlled.

BUTTONS

Each button has a specific function which is described below.

LIGHT Button: This button is used to illuminate the display and for the shutdown of the device.

MODE Button: This button is used to enter the menus. The button can be pressed briefly or it can be

pressed and held for a moment to achieve different effects. Within the clock function, press and hold the

button (4 sec.) to access the dive computer.

UP button: This button is used to move up through menus and to increase values.

DOWN button: This button is used to move down through menus and to decrease values.

The clock's standard screen shows the time in the center of the display. By pressing the UP and DOWN

buttons the screen displays the following additional indications and information:

- SEC: Indicates that the information displayed under the time are the seconds.

- DATE: Indicates that the information displayed under the time is the date (day and month).

- T2: Indicates that the information displayed under the time is the second time zone.

- AL: Indicates that the information displayed under the time is the alarm time currently set.

- CHRO: Indicates that the chronograph can be accessed through this menu.

- ENTR DIVE: Indicates that the dive computer can be accessed through this menu.

- SET TIME: Indicates that the time, second time zone, alarm time, date and 12/24 hour display mode can

be adjusted through this menu.

- SET LOCK: Indicates that the lock function of the dive computer can be accessed through this menu.

   

CHRONOGRAPH

To access the chronograph, press the UP or DOWN buttons until the CHRO indication appears at the top

right of the screen. Press the MODE button. The CHRO indication will disappear. To activate the

chronograph, press the UP button.

Access the split times by pressing the DOWN button (the upper left part of the screen will display the

indication L1, 2,...20 while the time of the chronograph will display the relevant split time for three seconds

before showing the count again). It is possible to store up to 20 split times. Stop the count by pressing the

UP button (the stop indication will be displayed at the top left of the screen). Split times can be accessed

by pressing the DOWN button. To reset the function press and hold the UP button.

SHUTDOWN OF THE DEVICE

In order to reduce the consumption of the battery when the device is not in use, Newton can be switched

off by pressing the LIGHT button for 5 seconds. The shutdown will cause the loss of the TIME and DATE,

and will be possible only after the no-fly time.

NEWTON WATCH DISPLAY

NEWTON WATCH BUTTONS

CHRONO

TIME DISPLAY

LOCKED DIVE COMPUTER

TIME DISPLAY

TIME DISPLAY + SECONDS

TIME DISPLAY + ALARM ON

TIME DISPLAY + CHRONO READY CHRONO

CHRONO ON

TIME DISPLAY + ALARM OFF

TIME DISPLAY + DATE

DUAL TIME

CHRONO SPLIT TIME

3’’ BEFORE CHRONO SPLIT TIME

CHRONO RESET

LONG

CHRONO STOP CHRONO SPLIT TIME 1 CHRONO SPLIT TIME 2...20

DOWN

MODE

LIGHT

UP button: This button is used to

move up through menus and to

increase values.

Mode Button: This button is used to

enter the menus. The button can be

pressed briefly or it can be pressed

and held for a moment to achieve

different effects. Within the clock

function, press and hold the button (4

sec.) to access the dive computer.

DOWN button: This button is

used to move down through

menus and to decrease values.

LIGHT Button: This button is used

to illuminate the display and for

the shutdown of the device.

INDEX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cressi NEWTON Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info