Bedienungsanleitung Crivit IAN 97694 Inshore 335 (Seite 36 von 38) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

750309

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

38 GB

2. To deﬂate the side chambers / screw the

valves completely from their base mountings.

Kit bag

A kit bag is included with this article in which

the kayak is stowed away for transport and

storage. In order to close this, please use the

200cm rope. The kit bag is also useful when

aﬂoat for the splash-proof safekeeping of provi-

sions, clothes etc. Please remember that this bag

is not watertight. For this reason, do not store

sensitive objects in it, for example, cameras.

For use aboard it is advisable to remove the

rope and to ﬂatten and roll up the upper end,

closing it when necessary with the hook and

loop fastener.

Storage bag

A splash-proof storage bag is also included

which can be attached to the back of the front

seat using the hook and loop fastener.

Small objects can be stowed away here to keep

them dry but please remember that this bag too

is not completely watertight. Please do not store

sensitive objects here.

Transport

Always transport the kayak with two adults and

use the carrying straps at the front and back

of the craft.

Care / Maintenance / Storage

WARNING!

Only use care products that do not

contain traces of acids or petroleum and

never use silicone-based products.

1. Clean your kayak thoroughly after every use

with fresh water and mild soap to remove salt

crystals, sandy granules and other small dirt

particles. Leave it to dry completely.

2. Lay both of the upper side pipes into the

inside of the kayak and fold them together

carefully.

3. Store your kayak in a clean and dry place

away from direct sunlight and somewhere

where there are no great temperature

ﬂuctuations. Pay attention to the fact, that the

kayak is not wrinkled but lays ﬂat, and keep

well out of the reach of rodents.

Repairs

WARNING!

You should not attempt to repair large

damaged sections by yourself.

You can repair small areas with the enclosed

repair kit .

1. Deﬂate the kayak completely and clean the

area to be repaired with an alcohol-based

solution. Roughen up the damaged area

surrounding the hole or tear with a ﬁne sand

paper.

2. Cut a patch to cover the damaged area. The

patch should overlap the damaged area by at

least 1.25cm on all sides.

3. Apply the glue to the kayak as well as to the

patch. Allow to dry for approx. 3 minutes.

4. Press the patch down ﬁrmly using a soft

object. Make sure that you are working on a

ﬂat, even surface. Remove any air bubbles

with a rounded object, gently pushing the

bubbles in an outward direction.

5. Always wait at least 12 hours after a repair

before pumping up the kayak once again.

Disposal

Please dispose of the product and packaging in

an environmentally friendly manner, separating

diﬀerent materials for recycling as required!

Dispose of this item through an authorised

disposal company or through your local waste

disposal facilities - ask your local authority for

information if further guidance is required.

Ensure that you comply with all regulations

currently in force.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit IAN 97694 Inshore 335 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info