Bedienungsanleitung Crivit Sports 1-LD3875 - IAN 103142 (Seite 40 von 47) (Deutsch, Englisch, Holländisch, Französisch)

639390

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Important Information regarding the use of the Heart

rate monitor watch.

Press MODE to select or exit the modes of the watch. Press SEL to enter your

personal data and press SET to confirm the setting.

Press MODE to proceed within the menu.

Quick setting

Press and hold SEL when setting numerical values to use the quick setting feature.

Setting up the heart rate monitor watch

Remove the protective film from the display of the watch and press MODE, SEL or

SET. The watch will now guide you through the initial settings menu.

Press SEL to select the English or German language (DEU/ENG) and confirm your

setting by pressing SET. Select the unit (EINH/UNIT) of measurement KM or miles

in the same way. Enter your year of birth (GEB/BIRtH). Press SEL to set the value

and press SET to confirm the setting. Set the month and the day of your birth in the

same way. Now select 12 or 24-hour time display mode (ZEIt/TIME) by pressing

SEL and confirm your setting by pressing SET. Now set the hours, minutes and

seconds. Set each value by pressing SEL and confirm each setting by pressing SET.

Set the year, month and day in the same way and confirm each setting by pressing

SET. The body weight setting now appears. Set your weight by pressing SEL and

confirm by pressing SET. Set your height in the same way and confirm the setting

by pressing SET. The pedometer calibration option appears (KALI/CALI). Press

SEL to select NEIN/NO or JA/YES and confirm your selection by pressing SET.

Notes on calibration:

Please calibrate the watch for walking and running even if you only intend to use

the watch for walking. In this case, perform a fast walk during the calibration for

running. The calibration can also be performed later when using the watch in

pedometer mode.

If the pedometer is not calibrated, it will use the default settings and this may cause

the values shown on the display during training to deviate strongly from the actual

values. During calibration, the watch will record your personal movement profile.

Greater consistency of movement during the recording and longer duration of the

recording will increase the precision of the pedometer during training. The

calibration will allow the watch to automatically detect whether you are running or

walking and adjust the displayed values automatically. The displayed values are

more exact if your movement during training has the same rhythm and speed as

during calibration. Wear the watch on the same wrist during calibration and

during training.

Calibration

Press SEL to start the recording. KALI/CALI and JA/YES will appear on the

display. Press SET to confirm. LAUFEN/RUN will appear on the display. Press SET

to show the distance setting (DST). Press SEL to select the distance and confirm

your setting by pressing SET. Now press SEL to start the calibration. After you are

finished running the calibration distance, press SEL once again. ENDE/DONE or

ERROR will appear on the display. If ERROR appears, the calibration must be

repeated. After successful calibration, perform the calibration for GEHEN/WALK

in the same way as for LAUFEN/RUN.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit Sports 1-LD3875 - IAN 103142 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info