Bedienungsanleitung Crivit Sports 1-LD3875 - IAN 103142 (Seite 42 von 47) (Deutsch, Englisch, Holländisch, Französisch)

639390

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Press SEL to start or stop the stop watch.

Press SET while the stopwatch is running to record a lap time (L01). Up to 99 lap

times (L99) can be recorded. VOLL/FULL will appear after reaching the maximum

number of lap time recordings.

When the stopwatch is stopped, press SET to activate the memory feature (R) and

display the best lap time (BESte/BEST LAP). Press SEL repeatedly to display the

other lap times. Press SET to return to the stopwatch.

Press and hold SEL to reset the stopwatch.

Note: The memory feature can only be used if at least one lap time has been

recorded.

Timer (TIMER) max. 9:59:00

First, press MODE repeatedly to select timer mode (TIMER). The pre-set time of

0:3000 seconds will appear on the display.

Press and hold SET to set the timer.

The hours of the timer time will appear blinking on the display. Press SEL to set the

hours and press SET to confirm your setting. Set the minutes in the same way. Press

SEL to start or stop the timer. After the set time has elapsed, an alarm will sound for

60 seconds. Press MODE, SEL or SET to stop the alarm.

Pedometer (PEDO)

First, press MODE repeatedly to select pedometer mode (PEDO). STEP will

appear on the display along with the data that has been stored thus far. Press SEL

to switch between the different features.

Steps (STEP) and time > steps (STEP) and training duration (T) > steps (STEP) and

distance (D) > steps (STEP) and speed (S) > Calories (KCAL) and fat burn in gram

(g), steps (STEP) and heart rate (HR).

Press SET to start the pedometer. A symbol showing two feet will appear on the

display. Press SET again to stop the pedometer.

Pedometer reset

Press and hold SET to delete all data.

Calibrating the pedometer

If the pedometer has not been calibrated as described in the chapter “Setting up

the heart rate monitor watch” or if you wish to recalibrate the pedometer, press

and hold SET.

The body weight setting now appears. Set your weight by pressing SEL and

confirm your setting by pressing SET. Now set your height in the same way and

confirm the setting by pressing SET. The calibration option now appears

(KALI/CALI).

Press SEL to start the recording. KALI/CALI and JA/YES will appear on the

display. Press set to confirm. LAUFEN/RUN will appear on the display. Press SET

to show the distance (DST) setting. Press SEL to select the distance and confirm

your setting by pressing SET. Now press SEL to start the calibration. After you are

finished running the calibration distance, press SEL once again. ENDE/DONE or

ERROR will appear on the display. If ERROR appears, the calibration must be

repeated. After successful calibration, perform the calibration for GEHEN/WALK

in the same way as for LAUFEN/RUN.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Crivit Sports 1-LD3875 - IAN 103142 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info