Bedienungsanleitung Croozer Ski-Set (Seite 25 von 44) (Deutsch, Englisch, Französisch)

772438

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

CroozerSkiSet16-D-9-15

Installing and removing the Croozer Ski Set

Kid

bar into the angled bar. The stickers on the two bars

should be facing the same direction. There are two

insertion positions (15, 16); begin by using the  rst

position (15). The other position is for adjusting the

tow-bar length. For more information, see “Adjusting

the harness and tow bars” on page 10.

9. Follow the same steps for attaching the second exten-

sion bar on the left side. When inserting the second

left extension bar into the  rst, the two “L 2” stickers

should be facing the same direction. This bar also has

two possible insertion positions (17, 18); begin by us-

ing the  rst position (17).

10. Follow the same steps to attach the extension bars on

the right side of the Croozer.

After assembling the tow bars, be sure to check that they

are locked securely together. This can be done by pulling

on the bars without squeezing the buttons. It should not

be possible to pull out the extension bars without squeez-

ing the buttons. Using the Ski Set with tow bars that have

not been locked securely together could cause accidents

with serious injury or death.

Step E: Attaching the harness system to the

tow bars

Elastomer shock absorbers (19) with integrated tow-bar

connectors are permanently attached to the left and right

sides of the waist harness.

Tip: There are two ways of attaching the harness system

to the tow bars. One option is to first attach the har-

ness system to the tow bars on the ground and then

buckle the harness around your waist. The second

option is to first buckle the harness around your

waist and then attach the tow bars by lifting them to

your waist and inserting the connectors. We recom-

mend using the first method in the beginning so

that you can familiarise yourself with the attachment

procedure.

1. Place the harness system on the ground in front of the

tow bars, ensuring that the opening of the harness is

facing in the direction of travel (i.e. towards the front)

and the shoulder straps are at the top of the harness.

2. Squeeze the two side buttons (20) on the left elas-

tomer shock absorber (19) using your thumb and

fore nger and insert the connector into the left tow bar.

The end of the left towbar is marked “L 3” (21). Insert

the connector until it locks into place in the hole (22) in

the tow bar.

3. Repeat these steps to attach the second elastomer

shock absorber.

After the elastomer shock absorbers have been con-

nected to the tow bars, be sure to check that the connec-

tion is secure. This can be done by pulling on the shock

absorbers without squeezing the buttons. It should not

be possible to pull out the connectors without squeezing

the buttons. Using the Ski Set with tow bars that have not

been locked securely together could cause accidents with

serious injury or death.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Croozer Ski-Set Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info