Bedienungsanleitung Cube MTB (Seite 18 von 37) (Englisch)

657563

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

| 31 30 |

MTB/ ROAD BIKE/ TREKKINGMTB/ ROAD BIKE/ TREKKING

•

It must not be possible to twist or slide

any of the parts.

•

There must be no audible creaking or

rattling sounds.

7.4 Check handlebar-mounted parts

1. Check the gearshift/brake levers,

grips (straight handlebars only) and

triathlon rest (triathlon bikes only) for

correct t:

•

Grip the front wheel between your legs

or keep the handlebars steady with your

hand.

•

Try to twist the brake levers with your

other hand.

Triathlon attachment

•

Grip the front wheel between your legs.

•

Try to twist the gear levers using your

other hand.

•

Try to pull the handgrips and the bar

ends from the handlebars.

•

It must not be possible to twist or slide

any of the parts.

•

There must be no audible creaking or

rattling sounds.

•

In case a bell has been tted to the hand-

lebar, it must be possible to reach it easily

with a nger or a thumb and it must not

be possible to move it.

7.5 Check the forks bearing

The forks bearing is the forks bearing

in the fork stem.

1. Check your forks bearing. The front

wheel must swivel easily in both direc-

tions with no play:

•

Stand beside your bike and hold the

handlebar grips with both hands.

•

Pull the front brake lever and keep the

brake applied.

•

Push your bike forward and backward in

short, jerky movements.

7.2 Check saddle and seat post

Risk of Personal Injury and Material

Damage!

If the saddle post is not inserted far

enough, the seat post can come loose.

This can lead to dangerous riding con-

ditions, falling, accidents and material

damage.

•

Note the correct saddle post insertion

distance. Please read Chapter 8.3 for infor-

mation.

If you have the requisite technical know-

ledge, you can tighten this yourself.

•

Please read Chapters 8.2, 8.3 and 11.2 for

information.

1. Check the saddle and seat post for tight-

ness:

Try to twist the saddle and seat post by

hand. It should not be possible to twist the

saddle and/or seat post.

Try to move the saddle in its clamp with

alternate up and down movements.

It should not be possible to move the saddle.

If either the saddle and/or the saddle post

can be moved, tighten them (see Chapters

8.2, 8.3, and 11.2.

7.3 Check handlebars and stem

Risk of Personal Injury and Material

Damage!

The handlebars and stem are very impor-

tant components in terms of your riding

safety.

Damage to them and mistakes during

assembly can lead to very severe falls.

•

If you discover any faults with these parts or

have doubts about them, you must under

no circumstances continue to use your bike.

•

Contact a specialist workshop immediately.

1. Check the handlebar and stem assembly.

•

The stem must be parallel to the front wheel

rim

•

and the handlebars must be at right angles

to it.

•

In the case of a shaft stem, the "Max" or

"Stop" or similar marking must not be

visible.

•

Grip the front wheel between your legs.

•

Grip the handlebars at both ends.

•

Try to twist the handlebars in either direc-

tion by hand.

•

Try to twist the handlebars in the stem by

hand.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cube MTB Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cube MTB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info