Bedienungsanleitung Cuisinart HSM-70 (Seite 4 von 7) (Englisch)

802953

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

ASSEMBLY

1. Attach hand mixer to stand

Line up the indent on the back end of the

hand mixer with the tab in the back of

the stand. Place hand mixer on the stand

with tab in indent and push the front of

the hand mixer down onto the stand until

it clicks into place.

2. Remove hand mixer from stand

Push down on hand mixer release button

and lift the front end of the mixer off and

up from the stand.

3. Raise stand head

Push down head lift release lever and

raise stand head until it locks into place.

Lower stand head

Push down on head and fully lower the

stand head until it clicks into place.

To place bowl on base

Line up grooves under bowl with the

grooves on the base and it locks into

place.

USE AND CARE

Inserting Beaters

1. Unplug mixer and set the power switch

to the OFF position.

2. Insert beater with collar into the larger

hole. Push beater in until it clicks into

place. Insert the beater with the plastic

padding on the end into the smaller hole.

Push beater in until it clicks into place.

Inserting Dough Hooks

1. Unplug mixer and set the power switch

to the OFF position.

2. Insert dough hook with collar into the

larger hole. Push dough hook in until it

clicks into place. Insert the dough hook

without the collar into the smaller hole.

Push dough hook in until it clicks into

place.

Note:

Dough hook with collar will also have plastic

padding on the end of the dough hook.

Inserting Chef's Whisk

Unplug mixer and set the power switch

to the OFF position

2. Hold chef’s whisk at stem end, and

insert into smaller hole. Push whisk in

until it clicks. DO NOT PUSH WHISK

IN FROM WIRE END, AS YOU MAY

DAMAGE WIRES.

Turning Mixer On/Off

Plug mixer into outlet. Press On/Off switch

to turn mixer On. Mixer will immediately

begin to mix on Speed 1. To turn mixer off,

press On/Off switch again.

Changing Speeds

Press the + button on the digital touchpad

to increase the speed. Press the - button to

decrease the speed.

CLEANING AND

MAINTENANCE

1. Unplug your Cuisinart® Hand Mixer

before cleaning.

Hand Mixer

Release hand mixer from stand by pressing

the hand mixer release button. Then lift the

beater release lever and remove the beaters

from the mixer. Wipe the hand mixer with a

damp cloth or sponge. Do not use abrasive

cleaners, which could scratch the surface.

NEVER PUT THE MOTOR HOUSING IN

WATER OR OTHER LIQUID TO CLEAN.

Bowl

If hand mixer is not on the stand, lift bowl

from base. If hand mixer is on stand, raise

the stand head using the head-lift release

lever and then remove bowl from base.

Wash the bowl by hand and dry thoroughly

or put in dishwasher. Never use a wire

brush, steel wool or bleach.

Stand

Wipe with a damp cloth and dry. Never use

abrasives or immerse in water.

Turntable

NOTE: It is not recommended to take turn-

table off stand. To clean, remove bowl and

hand mixer from stand. Wipe down turn-

table or wash by hand.

Larger

Hole

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cuisinart HSM-70 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info