Bedienungsanleitung Cupra Ateca 2018 (Seite 289 von 372) (Englisch)

817302

289

Zoom out

Zoom in

Vorherige Seite

1/372

Nächste Seite

Driver assistance systems

● off – does not permit the use of the

braking while manoeuvring function.

Temporary suppression of emergency

braking

●When the function is deactivated with the

Braking while manoeuvring button that appears

on the Parking System screen of the Easy

Connect system.

●Whenever any of the car doors, rear lid or

bonnet are opened.

Rear parking aid*

Description

The rear parking aid is an audible and visual

assistant that warns of obstacles located be-

hind the vehicle.

There are sensors integrated in the rear

bumper. When they detect an obstacle, you

are alerted by audible warnings and visually

on the Easy Connect system.

If the Top View Camera* is installed, the rear

parking aid will issue an audible warning

about objects near the rear of the vehicle,

and the Top View Camera* image will be

available on the Easy Connect screen, giving

a real image of the objects around the car.

Make particularly sure that the sensors are

not covered by adhesives, residues, dirt and

the like, as this could affect the system's op-

eration. Cleaning instructions ››› page 335.

The approximate measurement range of the

rear sensors is:

0.60 m

1.60 m

Automatic disconnection of Parking Aid

●Move the selector lever to position P.

●OR: accelerate to approx. 15 km/h (9 mph)

or faster.

Temporary suppression of sound in Park-

ing Aid

●Press the  function button.

Change from reduced view to full view

●Engage reverse gear or turn the selector

lever to position R.

●OR: press the car icon in reduced view.

As you approach the obstacle, the time in-

terval between the audible warnings will be

reduced. When you reach around 0.30 m

the warning will be constant: Do not contin-

ue to move forward (or backward) ››› in In-

troduction on page 281, ››› in Introduc-

tion on page 282 !

Side area:

Central area:

If you maintain separation from the obstacle,

the volume of the warning begins to reduce

after four seconds (does not affect the tone

of the constant warning).

Parking Aid operation

Parking Aid connection

●Move the selector lever to the R position.

Parking Aid disconnection

●Position the selector lever in P, N or D.

Set the lever to the N or D position to main-

tain the system active for approximately 8

seconds before switching off. During that

time, Parking assist will switch off if:

●The selector lever is moved to position P.

●OR: the vehicle accelerates to approx.

15 km/h (9 mph) or faster.

If the Top View Camera* is installed, rear

parking aid will be automatically deactivated

when disengaging reverse gear.

Manual disconnection of Parking Aid dis-

play (the audible sounds remain active)

●Press a button on the main menu of the

factory-assembled infotainment system.

●OR press the BACK function button. »

287

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca 2018 Seite 289

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info