Bedienungsanleitung Cupra Ateca 2018 (Seite 291 von 372) (Englisch)

817302

291

Zoom out

Zoom in

Vorherige Seite

1/372

Nächste Seite

Driver assistance systems

Adjusting the display and audible

warnings

The settings for the display and audible

warnings are controlled via the Easy

Connect*.

Rear volume*

Volume in the rear area.

Rear sound settings/sharpness*

Frequency (tone) of the sound in the rear

area.

Adjust volume

With the parking aid switched on, the active

audio/video source volume will be reduced

to the intensity of the selected setting.

Error messages

When the Parking Aid is activated or when it

is switched on, if a message reporting a Park-

ing aid error is displayed on the instrument

panel, there is a fault in the system.

If the fault disappears before disconnecting

the ignition, the next time that the parking

aid is engaged in reverse, no audible signal of

the existence of a fault will be issued.

If there is a fault in a sensor, the  symbol is

displayed on the Easy Connect display.

Have the fault corrected by a specialised

workshop without delay.

Towing bracket

In vehicles equipped with a towing bracket

device from the factory, when the trailer is

connected electrically, the Parking Aid will

not be activated, even when the selector lev-

er is placed in the R position.

Top View Camera*

Introduction

Using 4 cameras, the system generates a

representation that is shown on the infotain-

ment system display. The cameras are loca-

ted on the radiator grille, the exterior mirrors

and the rear lid.

The functions and representations of the

Area View system may vary depending on

whether or not the vehicle has ParkPilot.

WARNING

The image from the cameras does not

make it possible to calculate the distance to

the obstacles (people, vehicles, etc.) pre-

cisely, so using them could cause serious

accidents and injury.

●The camera lenses augment and distort

the visual field and the objects on the

screen are seen differently and imprecisely.

●Certain objects may not be shown or may

not be shown very clearly, for example,

posts or thin rails, due to the screen resolu-

tion or if light conditions are insufficient.

●The cameras have blind spots in which

obstacles and people are not registered.

●The camera lens must be kept free, with-

out snow or ice, and should not be covered.

WARNING

The smart technology incorporated into

the Top View Camera* system cannot over-

come the limits imposed by the laws of

physics and it only works within the limits of

the system. The greater convenience provi-

ded by the Area View system should never

tempt you to take any risk that may com-

promise safety. If used negligently or invol-

untarily, it may cause serious accidents and

injuries. The system is not a replacement

for driver awareness.

●Adapt your speed and driving style to suit

visibility, weather, road and traffic condi-

tions.

●Do not be distracted from the traffic by

looking at the screen. »

289

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca 2018 Seite 291

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info