Bedienungsanleitung Cupra Ateca 2023 (Seite 291 von 355) (Englisch)

817294

291

Zoom out

Zoom in

Vorherige Seite

1/355

Nächste Seite

Checking and relling levels

291

Brake uid

●When the motor is hot, its cooling system is

pressurised. Do not open the expansion tank

cap, hot coolant may splash out and cause

severe burns and other injuries.

–Turn the cap slowly and very carefully an-

ticlockwise while pressing it down slightly.

–Always protect your face, hands and arms

from the hot coolant and steam with a

large thick cloth.

NOTICE

Only use distilled water! Other types of wa-

ter contain chemical substances that could

cause signicant corrosion damage. If you

have added non-distilled water, have all of

the motor cooling system uid changed im-

mediately by a specialist workshop.

●When topping up the, do not ll over the

upper edge of the marked area ›››Fig.194.

Otherwise, when the temperature rises the

excess uid will be expelled from the motor

cooling system and could cause damage.

●If the system leaks a lot of coolant, only

rell once the motor has cooled down com-

pletely. If there is a signicant loss of coolant,

there may be leaks in the cooling system. Im-

mediately go to a specialist workshop to have

the system checked. This could result in mo-

tor damage.

●Do not add coolant if the expansion tank

is completely empty! Air may have got into

the cooling system. Do not continue driving

and seek assistance from specialist person-

nel. This could result in motor damage.

●When changing the operating uids, make

sure that you pour the correct uids into the

correct ller necks. Using the wrong operat-

ing uids can lead to serious malfunctions

and motor damage.

Brake uid

Check and rell the brake uid

Fig.196 Front compartment: brake uid

reservoir cap.

Checking the brake uid level

The brake uid level must be between the

and markings.

However, if the brake uid level goes down no-

ticeably in a short time, or drops below the

mark, there may be a leak in the brake sys-

tem. Seek specialist assistance. A warning light

on the instrument panel display monitors the

brake uid level.

Brake uid level

The control lamp lights up red.

Brake uid level is too low.

● Stop driving!

●Check the brake uid level.

●If the brake uid level is too low, seek special-

ist assistance.

Changing brake uid

We recommend that you have the brake uid

changed by a Technical Service.

WARNING

If the brake uid level is low or unsuitable/old

brake uid is used, the brake system may fail

or braking power may be reduced.

●Check the brake system and the brake uid

level regularly!

●When the brake uid is used and brakes are

subjected to extreme braking forces, bub-

bles of vapour form in the brake system.

These bubbles can signicantly reduce brak-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Ateca 2023 Seite 291

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Ateca 2023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info