Bedienungsanleitung Cupra Formentor - 2022 (Seite 298 von 396) (Englisch)

810366

298

Zoom out

Zoom in

Vorherige Seite

1/396

Nächste Seite

296

Storing objects

The towing bracket’s hook is located in the

bumper. Tow hooks for electrical unlocking

cannot be removed.

There should be no person, animal or object in

the path of the tow hook››› .

Unlocking the tow hook and removing it

● Stop the vehicle and connect the electronic

parking brake ›››page210.

●Switch o the engine.

● Open the rear lid.

●Pull the ›››Fig.187 button briey. The

tow hook unlocks electrically and automati-

cally turns outwards. The button's control lamp

ashes.

●Finish remove the tow hook by hand until

you feel and hear that it has engaged and the

control lamp on the button stays on.

●Close the rear lid.

●Hitching and connecting a trailer

›››page291.

Retracting the tow hook

●Stop the vehicle and apply the electronic

parking brake.

●Switch o the engine.

●Unhook the trailer and interrupt the electri-

cal connection between it and the vehicle. If

you are using an adapter, remove it from the

trailer's power socket.

●Open the rear lid.

●Pull the ›››Fig.187 button briey. The tow

hook unlocks electrically.

●Turn the tow hook under the bumper with

your hand until you feel and hear that it en-

gages and the control lamp on the button re-

mains on continuously.

●Close the rear lid.

The button's control lamp

Flashing:

This means that the tow hook has not yet

engaged correctly or is damaged ››› .

Remains on:

If it remains on while the rear lid is open,

the tow hook is correctly in place both

when extracted and when covered.

The button's indicator lamp switches o ap-

proximately 1 minute after closing the rear lid.

WARNING

Undue use of the towing bracket may cause

injury and accidents.

● Only use the tow hook if it is properly en-

gaged.

●Always ensure that no person, animal or

object is to be found in the path of the tow

hook.

●Never use a tool or instrument while the

tow hook is moving.

●Never press the button ›››Fig.187 when

there is a trailer hooked to the vehicle or

when a carrier system or other accessories

are mounted on the tow hook.

●If the tow hook is not attached properly, do

not use it. Instead, go to a specialised work-

shop and have the towing bracket checked.

●If you detect any fault in the electrical sys-

tem or in the towing bracket, contact a speci-

alised workshop and ask them to check it.

●If the ball has a diameter of less than

49mm at any one point, do not use the tow-

ing bracket under any circumstances.

NOTICE

If you clean the vehicle with high-pressure

or steam devices, do not point the jet di-

rectly towards the retractable tow hook or

the trailer power socket, as this may damage

the joints or remove the grease necessary for

lubrication.

Note

At extremely low temperatures, the tow hook

may be impossible to operate. In this case,

place the vehicle in a warmer location (for

example, a garage).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Formentor - 2022 Seite 298

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Formentor - 2022

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info