Bedienungsanleitung Cupra Formentor e-HYBRID - 2023 (Seite 25 von 396) (Englisch)

810364

Zoom out

Zoom in

Vorherige Seite

1/396

Nächste Seite

Driver information

Instrument panel

1) Not available in all countries.

–

Current consumption: The current

fuel consumption display operates

throughout the journey, in litres/100 km;

and with the engine running and the vehi-

cle stopped, in litres/hour.

Average consumption: The average

fuel consumption is displayed after driving

for approximately 300metres.

Travelling time: This indicates the

hours (h) and minutes (min) since the igni-

tion was switched on.

Range: Approximate distance in km that

can still be travelled if the same driving

style is maintained.

AdBlue range or : Approximate dis-

tance in km that can still be travelled with

the current level of the AdBlue® tank with

the same driving style. The indication ap-

pears from a range of less than 2400 km

and cannot be deactivated.1)

Distance travelled: Distance covered

in km (m) after switching on the ignition.

Average speed: The average speed will

be shown after driving for approximately

100metres.

Boost/Torque: Indicates the power and

torque of the combustion engine (does

not indicate electric mode).

FAS: Reduced assistant indication.

Oil temperature display

The engine reaches its operating temperature

when, under normal driving conditions, the

oil temperature is between 80°C (176°F) and

120°C (248°F). If a great eort is required from

the engine and the outside temperature is

high, the engine oil temperature may increase.

This does not present any problem as long as

the warning lamps or ›››page332 do

not appear on the display.

Warning and information messages

The system runs a check on certain com-

ponents and functions when the ignition is

switched on and while the vehicle is moving.

Faults are displayed on the instrument clus-

ter display as red and yellow warning symbols

›››page11 accompanied by messages and,

depending on the case, even an audible warn-

ing. The representation of the messages and

symbols may vary depending on the version of

the instrument panel.

Existing faults can also be checked man-

ually. To do this, open the Vehicle status

›››page30 menu.

Priority 1 warning (in red)

The symbol lights up or ashes (in part ac-

companied by audible warnings). Stop driv-

ing! Danger! Check the fault and eliminate

the cause. If necessary, seek professional as-

sistance.

Priority 2 warning (in yellow)

The symbol lights up or ashes (in part accom-

panied by audible warnings). Operating faults

or the lack of operating uids can cause dam-

age to the vehicle or a fault. Check the faulty

function as soon as possible. If necessary, seek

professional assistance.

Reference to information in the own-

er's manual

Further information on any warnings can be

found in the owner's manual.

Information message

It provides information about processes in the

vehicle.

Accessing warnings and information

Existing faults can also be checked in the info-

tainment system:

● Press > Vehicle data > Vehi-

cle status ›››page34.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cupra Formentor e-HYBRID - 2023 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cupra Formentor e-HYBRID - 2023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info