Bedienungsanleitung D-Link DWL-6620APS (Seite 55 von 136) (Englisch)

728147

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 55

October 2017

Section 4 - Managing the Access Point

Field Description

Authentication The authentication algorithm denes the method used to determine whether a client station

is allowed to associate with an AP when static WEP is the security mode.

Specify the authentication algorithm you want to use by choosing one of the following

options:

•) Open System authentication allows any client station to associate with the AP whether

that client station has the correct WEP key or not. This algorithm is also used in

plaintext, IEEE 802.1X, and WPA modes. When the authentication algorithm is set to

Open System, any client can associate with the AP.

Note: Just because a client station is allowed to associate does not ensure it can exchange

trafc with an AP. A station must have the correct WEP key to be able to successfully access

and decrypt data from an AP, and to transmit readable data to the AP.

•) Shared Key authentication requires the client station to have the correct WEP key in

order to associate with the AP. When the authentication algorithm is set to Shared

Key, a station with an incorrect WEP key will not be able to associate with the AP.

•) Both Open System and Shared Key. When you select both authentication

algorithms:

•) Client stations congured to use WEP in shared key mode must have a valid WEP

key in order to associate with the AP.

•) Client stations congured to use WEP as an open system (shared key mode not

enabled) will be able to associate with the AP even if they do not have the correct

WEP key.

Table 25 - Static WEP

Static WEP Rules

If you use Static WEP, the following rules apply:

•) All client stations must have the Wireless LAN (WLAN) security set to WEP, and all clients must have one of the

WEP keys specied on the AP in order to de-code AP-to-station data transmissions.

•) The AP must have all keys used by clients for station-to-AP transmit so that it can de-code the station

transmissions.

•) The same key must occupy the same slot on all nodes (AP and clients). For example if the AP denes abc123

key as WEP key 3, then the client stations must dene that same string as WEP key 3.

•) Client stations can use different keys to transmit data to the access point. (Or they can all use the same key, but

this is less secure because it means one station can decrypt the data being sent by another.)

•) On some wireless client software, you can congure multiple WEP keys and dene a client station “transfer

key index”, and then set the stations to encrypt the data they transmit using different keys. This ensures that

neighboring APs cannot decode each other’s transmissions.

•) You cannot mix 64-bit and 128-bit WEP keys between the access point and its client stations.

IEEE 802.1X

IEEE 802.1X is the standard dening port-based authentication and infrastructure for doing key management.

Extensible Authentication Protocol (EAP) messages sent over an IEEE 802.11 wireless network using a protocol

called EAP Encapsulation Over LANs (EAPOL). IEEE 802.1X provides dynamically-generated keys that are

periodically refreshed. An RC4 stream cipher is used to encrypt the frame body and cyclic redundancy checking

(CRC) of each 802.11 frame.

This mode requires the use of an external RADIUS server to authenticate users. The AP requires a RADIUS server

capable of EAP, such as the Microsoft Internet Authentication Server. To work with Windows clients, the authentication

server must support Protected EAP (PEAP) and MSCHAP V2.

You can use any of a variety of authentication methods that the IEEE 802.1X mode supports, including certicates,

Kerberos, and public key authentication. You must congure the client stations to use the same authentication method

the AP uses.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-6620APS Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von D-Link DWL-6620APS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info