Bedienungsanleitung D-Link DWL-6620APS (Seite 57 von 136) (Englisch)

728147

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 57

October 2017

Section 4 - Managing the Access Point

Field Description

Session Key

Refresh Rate

Enter a value to set the interval at which the AP will refresh session (unicast) keys for each

client associated to the VAP.

The valid range is 0 – 86400 seconds. A value of 0 indicates that the broadcast key is not

refreshed.

Table 26 - IEEE 802.1X

Note: After you congure the security settings, you must click Apply to apply the changes and to

save the settings.

WPA Personal

WPA Personal is a Wi-Fi Alliance IEEE 802.11i standard, which includes AES-CCMP and TKIP mechanisms. The

Personal version of WPA employs a pre-shared key (instead of using IEEE 802.1X and EAP as is used in the

Enterprise WPA security mode). The PSK is used for an initial check of credentials only.

This security mode is backwards-compatible for wireless clients that support the original WPA.

Figure 27 - Modify Virtual Access Point Settings (WPA Personal)

Field Description

WPA Versions Select the types of client stations you want to support:

•) WPA. If all client stations on the network support the original WPA but none support the

newer WPA2, then select WPA.

•) WPA2. If all client stations on the network support WPA2, we suggest using WPA2

which provides the best security per the IEEE 802.11i standard.

•) WPA and WPA2. If you have a mix of clients, some of which support WPA2 and others

which support only the original WPA, select both of the check boxes. This lets both

WPA and WPA2 client stations associate and authenticate, but uses the more robust

WPA2 for clients who support it. This WPA conguration allows more inter-operability,

at the expense of some security.

Cipher Suites Select the cipher suite you want to use:

•) TKIP

•) CCMP (AES)

•) TKIP and CCMP (AES)

Both TKIP and AES clients can associate with the AP. WPA clients must have one of the

following to be able to associate with the AP:

•) A valid TKIP key

•) A valid AES-CCMP key

Clients not congured to use a WPA Personal will not be able to associate with the AP.

Key The Pre-shared Key is the shared secret key for WPA Personal. Enter a string of at least 8

characters to a maximum of 63 characters. Acceptable characters include upper and lower

case alphabetic letters, the numeric digits, and special symbols such as @ and #.

Broadcast Key

Refresh Rate

Enter a value to set the interval at which the broadcast (group) key is refreshed for clients

associated to this VAP (the default is 300).

The valid range is 0–86400 seconds. A value of 0 indicates that the broadcast key is not

refreshed.

Table 27 - WPA Personal

Note: After you congure the security settings, you must click Apply to apply the changes and to

save the settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-6620APS Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von D-Link DWL-6620APS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info