Bedienungsanleitung D-Link DWL-8710AP (Seite 97 von 136) (Englisch)

728146

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Unied Access Point Administrator’s Guide

Page 97

October 2017

Section 8 - Conguring Client Quality of Service (QoS)

Field Description

Source Port Select this eld to include a source port in the match condition for the rule. The source port

is identied in the datagram header.

Once you select the eld, choose the port name or enter the port number.

Select From List

Select the keyword associated with the source port to match:

•) ftp

•) ftpdata

•) http

•) smtp

•) snmp

•) telnet

•) tftp

•) www

Each of these keywords translates into its equivalent port number.

Match to Port

Enter the IANA port number to match to the source port identied in the datagram header.

The port range is 0 – 65535 and includes three different types of ports:

•) 0 – 1023: Well Known Ports

•) 1024 – 49151: Registered Ports

•) 49152 – 65535: Dynamic and/or Private Ports

Destination IP

Address

Select this eld to require a packet’s destination IP address to match the address listed

here. Enter an IP address in the appropriate eld to apply this criteria.

Wild Card Mask Species the destination IP address wildcard mask.

The wild card masks determines which bits are used and which bits are ignored. A wild card

mask of 255.255.255.255 indicates that no bit is important. A wildcard of 0.0.0.0 indicates

that all of the bits are important. This eld is required when Source IP Address is checked.

A wild card mask is in essence the inverse of a subnet mask. For example, to match the

criteria to a single host address, use a wildcard mask of 0.0.0.0. To match the criteria to a

24-bit subnet (for example 192.168.10.0/24), use a wild card mask of 0.0.0.255.

Destination Port Select this eld to include a destination port in the match condition for the rule. The

destination port is identied in the datagram header.

Once you select the eld, choose the port name or enter the port number.

Select From List

Select the keyword associated with the destination port to match:

•) ftp

•) ftpdata

•) http

•) smtp

•) snmp

•) telnet

•) tftp

•) www

Each of these keywords translates into its equivalent port number.

Match to Port

Enter the IANA port number to match to the destination port identied in the datagram

header. The port range is 0 – 65535 and includes three different types of ports:

•) 0 – 1023: Well Known Ports

•) 1024 – 49151: Registered Ports

•) 49152 – 65535: Dynamic and/or Private Ports

IP DSCP To use IP DSCP as a match criteria, select the check box and select a DSCP value

keyword or enter a DSCP value to match. You can select only one service type (DSCP, IP

Precedence or TOS bits) to use for match criteria.

Select from List

Select from a list of DSCP types.

Match to Value

Enter a DSCP Value to match (0 – 63).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

D-Link DWL-8710AP Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info