25
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the remote display.
2.Press the MODE button to select the desired mode.
Then, set the desired temperature using the TEMP.
▲ or ▼ buttons.
3.
Press the SLEEP button on the remote controller. The
unit will then be in the sleep mode and will cool the
room to the desired temperature. After a while the unit
will increase the temperature again.
This process will then repeat.
4.
Press the “TURBO/MILD” button to select powerful cool-
ing if this button is selected one more time, it is become
normal power. TURBO/MILD function
is disable in actual heat operation (for
example, heating operation in the
Auto Mode or Heat Mode)
TO CANCEL SLEEP MODE:
To cancel sleep mode, press the SLEEP button again;
the SLEEP indicator will disappear in the display.
TO SET UNIT TO SLEEP MODE
When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then
increase that temperature throughout the night.
3.
To turn the unit off, slide the
EMERGENCY/ REMOTE
switch to the REMOTE position.
2.The unit will then turn on and depending on the room
temperature, it will select the cool or dehumidifier
mode, fan speed and fan direction automatically.
EMERGENCY OPERATION
If the remote control is lost, broken or has no batteries, follow the procedures below:
EMERGENCY/REMOTE Switch
