3 Device Installation
Note
The following figure is for reference only, which is only used to know the device
installation, please refer to the actual device for more details.
The bracket installation wall needs to sustain at least 4x weight of the bracket and
camera.
Please cut off the device power when installing Micro SD card.
It can install the anti-drop rope on the hook of the device bottom and use
installation handle to carry the device when moving the device.
Figure 3-1
Step 1 Demount the device decoration cover, use screwdriver to dismantle the device
enclosure, take out the small filling material around the module.
Note
Please make sure the device enclosure is installed back within 30 minutes after it is
dismantled, which is to avoid water vapor entering the device and causing water mist
and other abnormities.
Step 2 (Optional) Install Micro SD card.
Note
