Please implement the step when it needs to use Micro SD card for data storage.
Find the Micro SD card installation slot in the location shown in Figure 3-2, adjust the
direction of Micro SD card well and insert it into the slot and complete installation.
Figure 3-2
Step 3 Install back the device enclosure and use screwdriver to tighten it firmly and
install the device decoration cover back in position.
Step 4 Fix the installation bracket on the mounting surface.
1) Mark the installation hole sites on the surface according to the installation
holes of the device pedestal and dig holes on the surface, insert the
expansion bolts into the holes you just dug.
2) Pull the device external cable (network cable without crystal connector) out
from the installation bracket.
3) Align the installation holes of the bracket pedestal with the installation hole
sites on the surface, and then insert the expansion bolts into the bracket
pedestal and lock them firmly.
Step 5 Install adapter block. Pull the device external cable through the adapter block
and twist it into the installation bracket, then use the locking screw to tighten it
firmly.
Step 6 Connect device cable and put it back into the installation bracket.
1) Install anti-drop rope.
When the device adopts wall-mounted installation mode, it needs to
hang one end of both anti-drop ropes on the hook of the device bottom,
and then hang the other end of both anti-drop ropes on the two hooks
of the installation bracket.
When the device adopts pendant installation mode, it needs to hang
one end of both anti-drop ropes on the hook of the device bottom, and
then hang the other end of both anti-drop ropes on the two hooks of the
adapter block.
