Deodorising Filter Unit
When odour or dirt becomes an issue
Vacuum clean
Do not use water
• Remove from the unit together with the frame
and remove dust using a vacuum cleaner.
• If odour becomes an issue, leave the part in
a shaded, breezy area. (about 1 day)
• Do not scrub the surface.
• Do not use water when cleaning. (If water is
used, the part will lose its shape and become
unusable.)
►
Page 24
Do not detach
the deodorising
lter from frame
Removing
Hold the lever and grip of the deodorising lter
unit and remove.
Lever
Grip
Attaching
Fully insert the deodorising lter unit.
Push until you
hear a catching
sound
•
If the deodorising lter unit is detached or not
properly attached, the odour sensor lamp will blink.
Dust Collection Filter
Filter tag
About every 10 years
Replace
Do not use water
Do not vacuum clean
• Do not use a vacuum cleaner or use water
when cleaning.
(If the lter is damaged or holes are opened
etc., dust will pass through the lter and
capacity for dust collection will be reduced.)
About part replacement timing
•
Replacement timing depends on usage patterns and
the location of the unit.
Standard replacement time is about 10 years
assuming that the unit is used daily in a home where
5 cigarettes are smoked a day. (Calculation in
accordance with testing method of Japan Electrical
Manufacturers’ Association JEM1467 standard)
If the impurity content of the ambient air is high, the
lter will need more frequent replacement.
Replace the dust collection lter if the lter is failing
to perform.
About purchasing and disposal
• Refer to “Separately Sold Part”.
►
Page 22
Removing
1
Remove the deodorising lter unit.
Dust collection lter
2
Pull the lter
tag upward.
3
Hold the lower part of the dust
collection lter and lift it out.
Attaching
1
Install a new dust collection lter, paying
attention to the orientation.
Side with tag and
markings should face
toward you and arrow
should point up
2
Attach the deodorising lter unit.
