745059
9
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
UK DE DK
9
FR CN
NOTE: Please be aware that spikes may damage the floor if it is not protected.
NOTE: On some floor surfaces and in some rooms, the use of spikes is a crucial aspect in
obtaining the best result.
3.2 DALI CALLISTO 2 C
DALI CALLISTO 2 C is optimized for stand mounting, but will also work well on a shelf. If
positioned on a stand or shelf, the enclosed bumpers can be placed under the speaker for
stable and vibration-free positioning (see Figure 3B).
4.0 CONNECTION
The main connections are located on the back of the CALLISTO C speaker (see Figure 5)
1) Mains connector
2) Mains power switch
3) Fuse compartment
4) ADC IN
5) USB Service port
6) LINK CONNECT button
5.0 USAGE
Connect the supplied power cord to the mains connector and your mains outlet. Use the mains
power switch to power on the CALLISTO C speaker.
NOTE: If the CALLISTO C fails to power up when connected to the mains and the power switch
is set to ON, the fuse may have blown or be faulty. Replace the fuse with the same type as
originally supplied – see fuse type on the rear of the amplifier. If the fuse blows repeatedly, have
the CALLISTO C speaker checked at an authorised service centre – contact your authorised
dealer.
5.1 CONNECTING THE SPEAKERS
The DALI SOUND HUB. If you have purchased a DALI SOUND HUB with your CALLISTO C
speakers follow the guidelines in the SOUND HUB Quick Start Guide to connect your
CALLISTO C speakers. ADC IN cabled connection. Connect the CALLISTO C speakers to a PRE
OUT. The speaker will in this case operate with fixed gain. DALI recommends using high quality
cables that preferably do not exceed 3 meters.
5.2 VOLUME CONTROL
When connected to the DALI SOUND HUB you can control the system volume on the front top
of each speaker (see figure 4). If using the ADC IN connection then you can only control the
volume on the playback device.
5.3 FRONT LED
The LED panel on the front of the speaker lights up and indicate the volume level whenever the
volume is changed. When the speaker is muted the outer most LEDs at both ends of the LED
panel will blink to indicates this state.
5.4 AUTO POWER OFF
The CALLISTO C will automatically power off if no signal has been detected for a period. The
CALLISTO C automatically powers on again the instance an audio signal is detected.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dali Callisto wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Dali Callisto

Dali Callisto Bedienungsanleitung - Deutsch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info