Bedienungsanleitung Dali Callisto (Seite 10 von 37) (Englisch)

745059

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

5.5 FIRMWARE UPDATE

If a new ﬁrmware for the CALLISTO C speakers is released, use the USB Service port to update

the speaker. Follow the instructions in the ﬁrmware download ﬁle.

Check for the latest ﬁrmware at www.dali-speakers.com.

5.6 FACTORY RESET

Should it become necessary to perform a factory reset on the CALLISTO C speaker it can be

done following the following steps:

1) Turn off the CALLISTO C speaker and wait for about 15 seconds

2) Press and hold the LINK CONNECT button

3) While holding the LINK CONNECT button turn on the CALLISTO C speaker

4) Keep holding the LINK CONNECT button until the position display starts blinking

5) The CALLISTO C speaker is now restores to factory defaults

6.0 THE LISTENING ROOM

Every room has its own distinctive acoustics, which inﬂuence the way we experience sound

from a speaker. The sound you hear consists of direct sound from the speakers and reﬂected

sound from the ﬂoor, ceiling and walls. The latter will affect how you experience the sound.

As a basic rule, try to avoid large, hard and reﬂective areas in the immediate vicinity of your

loudspeakers as it will typically cause strong reﬂections, which might disturb the precision and

spatial effect of the sound reproduction. Reﬂection might be suppressed by positioning e.g. a

plant between the speaker and the reﬂecting surface. Soft items such as carpets, curtains etc.

might help if the sound is too bright. Both the amount and quality of the deep bass depend on

the size and shape of the room, and the position of the speakers. Positioning the speakers near

a side or back wall will accentuate the bass. A corner location will accentuate it even more, but

will also increase the reﬂections.

7.0 RUNNING-IN

Like any mechanical system, a loudspeaker requires a “running-in” period to perform at its

best. You will experience a gradual increase in sound quality during the ﬁrst period of use. The

break-in period will vary depending on use and playback volume. You should expect up to 100

hours of playback until maximum performance is reached. Unlike other mechanical systems,

the life-span of a loudspeaker is increased by normal, regular playback of music.

8.0 CLEANING & MAINTENANCE

Clean the cabinets with a soft, dry cloth. If the cabinets are dirty, wipe with a soft cloth dipped in

all-purpose cleaner and then well wrung out. Be very careful when wiping the speaker cones,

as they are very fragile. Grille fronts can be cleaned with a clothes brush and wiped with a well

wrung, lint-free cloth and mild all-purpose cleaner.

8.1 AVOID DIRECT SUNLIGHT

The surfaces of the speakers may fade or become discoloured over time when exposed to

direct sunlight. Therefore avoid positioning the speakers in direct sunlight.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali Callisto Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dali Callisto

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info