Bedienungsanleitung Dali Fazon Sub 1 (Seite 7 von 26) (Deutsch, Englisch, Dänisch)

745209

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

UK DE DK

4.1 STEREO CONNECTIONS

If you want to use DALI FAZON SUB 1 in a stereo setup, your stereo (pre-)ampliﬁer should have

either a set of stereo RCA line outputs or a mono RCA line output available (please refer to the

instruction manual of your stereo (pre-)ampliﬁer). The line output connector(s) of your stereo (pre-)

ampliﬁer must be connected to the LINE INPUT connectors (L+R/LFE) of the subwoofer via one or

two RCA cables (sold separately).

4.2 SURROUND SOUND CONNECTIONS

4.2.1 LINE INPUT (MODE SELECTOR SET TO NORMAL)

Use the LINE INPUT connectors L and/or R/LFE with the MODE selector set to NORMAL if you want

to adjust the subwoofer Frequency output using the FAZON SUB 1 crossover button.

To use this option, connect the subwoofer output connector(s) of your surround sound (pre-)

ampliﬁer with the LINE INPUT connectors on the subwoofer using a RCA cable (sold separately).

If the surround sound (pre-) ampliﬁer has only one subwoofer output connector, connect it to the

LINE INPUT L connector (white) of the subwoofer using a RCA cable (sold separately). If there are

two subwoofer output connectors, connect both LINE INPUT L and R/LFE connectors using RCA

cables (sold separately).

Please refer to chapter “5.0 Installing and Adjusting” for instructions on how to make the adjustments.

4.2.2 LFE INPUT (MODE SELECTOR SET TO LFE)

Use the R/LFE input connector (red), if you want to adjust the subwoofer output from your surround

sound (pre-) ampliﬁer. When the R/LFE input connector is used and the MODE selector is set to

LFE, the built-in crossovers are bypassed and the crossover frequency adjustment button will not

be functioning.

To use this option, connect the surround sound (pre-) ampliﬁer subwoofer output to the R/LFE input

connector on the FAZON SUB 1 with a RCA cable (sold separately). Please refer to the instruction

manual of your surround sound (pre-) ampliﬁer on how to adjust the crossover settings.

4.3 USING TWO SUBWOOFERS

In most cases you will achieve excellent results with one DALI FAZON SUB 1. Use of two

subwoofers is possible as a no-compromise stereo solution, or for reproduction of very powerful

sound pressures in a stereo or surround setup in larger rooms.

The connections are basically the same as stated in previous chapters, but for stereo you should

only connect the left channel output connector of your stereo or surround (pre-) ampliﬁer to the

LINE INPUT L connector on the DALI FAZON SUB 1 placed to the left in your room. In a similar way

you should connect the right channel output connector of your stereo or surround (pre-) ampliﬁer

to the LINE INPUT R/LFE connector on the DALI FAZON SUB 1 placed to the right in your room.

For a surround setup, split the output signal from your surround sound (pre) ampliﬁer using

a RCA splitter (sold separately) and connect the two outputs. In all other respects, follow the

instructions above - but use separate channels. Please consult your authorised DALI dealer if

you have further questions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali Fazon Sub 1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dali Fazon Sub 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info