Bedienungsanleitung Dali Fazon Sub 1 (Seite 11 von 26) (Deutsch, Englisch, Dänisch)

745209

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

UK DE DK

C) VOLUME adjustment: Turn the button towards “Max” to increase the sound level. To reduce

the sound level, turn the button towards “Min”.

D) CROSSOVER: Adjustment of the crossover frequency from 50 Hz to 150 Hz. To be able to

adjust the crossover frequency, the MODE selector must be set to NORMAL (see B).

E) PHASE: push the PHASE button to toggle the phase of the subwoofer to either 0 degrees or

180 degrees phase angle.

F) LINE input: (MODE selector set to NORMAL): Connect the “L” input connector (white)

to the LEFT RCA line output connector of your stereo/surround sound (pre-) ampliﬁer.

Connect the “R/LFE” input connector (red) to the RIGHT RCA line output connector of your

stereo/surround sound (pre-) ampliﬁer. LFE input: (MODE selector set to LFE): connect the

“R/LFE” input connector (red) to the LFE RCA line output of your surround sound ampliﬁer.

G) POWER switch: Set the switch to ON to power up the subwoofer. Set the switch to OFF to

power off the subwoofer.

H) VOLTAGE selector: Set the VOLTAGE selector to match the voltage of your mains supply.

CAUTION: If the voltage selector is not set correctly there is a risk that the electronics of

the subwoofer will become defective when the subwoofer is connected to the mains.

I) FUSE compartment: If the subwoofer fails to power up when the connected to the mains and

the POWER switch is set to ON, the fuse may have blown or be faulty. Replace the fuse with

the same type as originally supplied – see fuse type on the ampliﬁer back plate. If the fuse

blows repeatedly, have the subwoofer checked at an authorised service centre – contact

your authorised dealer. Check if the correct voltage has been selected.

J) MAINS connector: Connect the supplied power cord to the MAINS connector and your

mains outlet.

WARNING: MAKE SURE THAT THE VOLTAGE SELECTOR IS SET TO THE CORRECT

VOLTAGE BEFORE CONNECTION.

K) There are three settings for the POWER MODE switch: ON:The power to the subwoofer

will be controlled by the POWER switch. AUTO: When the main power switch is on, the

subwoofer ampliﬁer will turn on when an input signal is detected on one of the inputs. When

a signal is not detected for approximately 10 minutes, the subwoofer ampliﬁer will go into

standby-mode. OFF: The subwoofer will be powered down.

11.0 TECHNICAL SPECIFICATIONS

In table 2 you will ﬁnd the most common speciﬁcations for our subwoofers. Please have in mind

that there are countless methods for measuring subwoofers. However, none of them really tell you

anything useful about how a subwoofer really sounds. Only your ears can decide whether one sub

sounds better than another. Like all our speakers, DALI FAZON SUB 1 is designed to reproduce

music as honestly as possible.

Enjoy your new DALI FAZON SUB 1!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dali Fazon Sub 1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dali Fazon Sub 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info