552859
10
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
ISS Installation Guidelines
8
Ideally, mount the ISS so that it is between 5’ (1.5 m) and 7’ (2.1 m) above the ground in
the middle of a gently sloping or flat, regularly mowed grassy or naturally landscaped area
that drains well when it rains. You can also mount the ISS on the roof, between 5’ (1.5 m)
and 7’ (2.1 m) above the roof surface. For areas with average maximum yearly snow
depths over 3’ (0.9 m), mount the ISS at least 2’ (0.6 m) above this depth.
Never install the ISS where it will be directly sprayed by a sprinkler system.
Avoid installations near bodies of water such as swimming pools or ponds.
Do not locate the ISS under tree canopies or near the sides of buildings that create “rain
shadows.” For heavily forested areas, site the ISS in a clearing or meadow.
Site the ISS in a location with good sun exposure throughout the day.
For agricultural applications:
Install the ISS so that it is between 5’ (1.5 m) and 7’ (2.1 m) above the ground and in
the middle of the farm between similar crop types (ie. two orchards, two vineyards,
or two row crops), if possible.
Avoid areas exposed to extensive or frequent applications of agricultural chemicals
(which can degrade the sensors).
Avoid installation over bare soils. The ISS performs best when installed over well-
irrigated, regularly mowed grass
If the last three guidelines cannot be met, install the ISS at the edge of the primary
crop of interest.
Siting guidelines that may affect the anemometer
For optimal wind data, mount the ISS so that the wind cups are at least 7’ (2.1 m) above
obstructions such as trees or buildings that may obstruct wind flow.
For optimal wind data, you may mount the ISS on a roof, keeping in mind ease of access
to the ISS for maintenance and safety considerations. Ideally, mount it so that the wind
cups are at least 7’ (2.1 m) above the roof apex.
The standard for meteorological and aviation applications is to place the anemometer 33’
(10 m) above the ground. Seek professional help for this such installation.
The standard for agricultural applications is to place the wind cups 6’ (2 m) above the
ground. This is important for evapotranspiration (ET) calculations.
Note: For roof mounting, and ease of installation, we recommend using the optional tripod (#7716). For other
installations, use the Mounting Pole Kit (#7717).
Note: For more detailed siting suggestions, see Application Note #30 on the Davis Support website (http://
www.davisnet.com/support/weather).
Mounting the ISS
The Vantage Vue ISS can only be mounted on the top of a pole or rod.
Note: A mounting pole is not included with your Vantage Vue ISS and must be purchased separately, either
from Davis Instruments or from your local hardware retailer.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

davis-vantage-vue

Suche zurücksetzen

  • Bei meinem Ger#t stimmen die Sonnenaufgang und -untergang-Zeiten nicht. Ist da die falsche Zeitzone eingestellt oder wie kann ich das richtigstellen? Eingereicht am 15-4-2020 09:59

    Antworten Frage melden
  • Was bedeutet auf dem Display "Low Batterie Transmitter 1 Eingereicht am 28-11-2017 19:48

    Antworten Frage melden
    • Die Sendebatterie in der Vantage VUE hat zu wenig Spannung und ist schnellstens zu tauschen, da Fehlmesswerte (Ausentemperatur, Ausenfeuchtigkeit, Windchill) zum Monitor gesendet werden. Beantwortet 29-11-2017 14:44

      Finden Sie diese Antwort hilfreich? (8) Antwort melden
  • es wird keine innen temp.und feuchte angezeigt im display bei der davis vue Eingereicht am 18-1-2017 08:30

    Antworten Frage melden
  • how connect Vintage Vue and Computer (Windows 7 or 10) Eingereicht am 12-7-2016 21:18

    Antworten Frage melden

    • Sprache Documenttyp Seiten
      Deutsch

      Kurzanleitung

      28
      Anleitung ansehen


      Brauchen Sie Hilfe? Stellen Sie Ihre Frage.
      Forenregeln
      Forum

      es wird keine innen temp.und feuchte angezeigt im display bei der davis vue Eingereicht am 18-1-2017 08:30
      Antworten Frage melden

      how connect Vintage Vue and Computer (Windows 7 or 10) ja ich habe windows 10 Beantwortet 17-3-2017 16:32

      Finden Sie diese Antwort hilfreich? (3) Antwort melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Davis VANTAGE VUE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Davis VANTAGE VUE

Davis VANTAGE VUE Kurzanleitung - Deutsch - 28 seiten

Davis VANTAGE VUE Bedienungsanleitung - Englisch - 56 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info