Bedienungsanleitung Defort DEC-2046N (Seite 9 von 100) (Alle Sprachen)

555841

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Chain saw

SAFETY NOTES

General Power Tool Safety Warnings Read all safety

warnings and all instructions.

Failure to follow the warnings and instructions may

result in electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mainsoper-

ated (corded) power tool or battery-operated (cordless) power

tool.

TECHNICAL DATA 1

PRODUCT FEATURES 2

The numbering of the product features refers to the illustration

of the machine on the graphics page.

1 Rear handle (insulated gripping surface)

2 Lock-off button for On/Off switch

3 On/Off switch

4 Oil ﬁ ller cap

5 Activation lever for kickback brake (hand guard)

6 Front handle (insulated gripping surface)

7 Deactivation mark “for kickback brake”

8 Nose sprocket

9 Chain guard

10 Saw chain

11 Chain bar

12 Gripping teeth

WORK AREA SAFETY

● Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

● Do not operate power tools in explosive atmospheres, such

as in the presence of ﬂ ammable liquids, gases or dust. Pow-

er tools create sparks which may ignite the dust or fumes.

● Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

● Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁ ed plugs and matching

outlets will reduce risk of electric shock.

● Avoid body contact with earthed or grounded surfaces, such

as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or

grounded.

● Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

● Do not abuse the cord. Never use the cord for carrying, pull-

ing or unplugging the power tool. Keep cord away from heat,

oil, sharp edges and moving parts. Damaged or entangled

cords increase the risk of electric shock.

● When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for out-

door use reduces the risk of electric shock.

● If operating a power tool in a damp location is unavoidable,

use a residual current device (RCD) protected supply. Use

of an RCD reduces the risk of electric shock.

PERSONAL SAFETY

● Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power tool

while you are tired or under the inﬂ uence of drugs, alcohol or

medication. A moment of inattention while operating power

tools may result in serious personal injury.

● Use personal protective equipment. Always wear eye pro-

tection. Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for ap-

propriate conditions will reduce personal injuries.

● Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/or bat-

tery pack, picking up or carrying the tool. Carrying power

tools with your ﬁ nger on the switch or energising power tools

that have the switch on invites accidents.

● Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

● Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in unex-

pected situations.

● Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in mov-

ing parts.

● If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected

and properly used. Use of dust collection can reduce dust-

related hazards.

POWER TOOL USE AND CARE

● Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better

and safer at the rate for which it was designed.

● Do not use the power tool if the switch does not turn it on

and off. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

● Disconnect the plug from the power source and/or the bat-

tery pack from the power tool before making any adjust-

ments, changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the

power tool accidentally.

● Store idle power tools out of the reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are dan-

gerous in the hands of untrained users.

● Maintain power tools. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that

may affect the power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents are caused

by poorly maintained power tools.

● Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

● Use the power tool, accessories and tool bits etc. in accord-

ance with these instructions, taking into account the working

conditions and the work to be performed. Use of the power

tool for operations different from those intended could result

in a hazardous situation.

SERVICE

● Have your power tool serviced by a qualiﬁ ed repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

Defort DEC-2046N Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info