Bedienungsanleitung Defort DLM-1010N (Seite 10 von 96) (Alle Sprachen)

555836

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Lubrication

The appliance does not need any extra lubrication.

STORAGE AND TRANSPORTATION

Keep the lawnmower in well-ventilated dry premises

with temperature not going below +5ºC.

We recommend unscrewing of wheels during transpor-

tation, which will prevent the lawnmower from moving

freely. When transporting the lawnmower on longer

distances or when forwarding thereof, dismantling and

placing of lawnmower into the manufacturer’s packing

(box) is advised.

TROUBLESHOOTING

Failure Cause/solution

Failure

The machine fails

to operate

Machine functions

intermittently

Mowing resuit is

irregular/rough

Cause/solution

Machine is not switched on

correctly /see chapter 4. USE

Extension cable damaged/

inspect cable, replace if

damaged

Extension cable damaged/

inspect cable, replace if

damaged. Machines internal

wiring damaged /contact

service centre

Check mowing-height

(wheels)/see Chapter 3.

ASSEMBLY Cutting blade is

blunt/Inspect blade, sharpen or

replace the blade

Machine vibrates

excessively

Some grass does

not enter into

grass réservoir

(lies on lawn after

mowing)

Rotating blade is out of

balance/check blade on

damages. Grass reservoir is

full/empty the reservoir before

continue. The fan (see spare

parts list; nr.6) is damaged/

replace the fan”. Grass is not

dry enough/continue mowing

when grass is dry

Faults

If a fault arises through wear in an element, please con-

tact the service address shown on the warranty card.

A drawing of the spare parts that may be obtained is

included at the end of these operating instructions.

ENVIRONMENT

To prevent damage during transport, the appliance is

delivered in a solid packaging which consists largely of

reusable material. Therefore please make use of op-

tions for recycling the packaging.

WARRANTY

Read the terms of warranty on the separate warranty

card which is enclosed. Please contact the service ad-

dress if you have any questions regarding accessories

and/or batteries.

is equipped with a reservoir for the collection of mowed

grass, the so-called bag, relieving of the necessity to

rake. NB: mowing of humid plants results in a signiﬁ -

cant decrease in efﬁ ciency of grass collection in the

bag.

ATTENTION!

• Do not mow wet grass with the lawnmower!

• Select the desired height of mowing before start-

ing up the appliance. All wheels shall be set on the

same level. Wheel axles shall be screwed on prop-

erly. A loose wheel may fall under a rotating knife.

• Running over the electric cord on the ground with

the operating lawnmower is prohibited. To prevent

running over the cord, we recommend hanging it on

the shoulder of the lawnmower’s operator.

• Push the lawnmower carefully or drag it before your-

self whenever operating the appliance.

• Start the motor up after the connection of the exten-

sion cord only.

• Overﬁ lling of glass reservoir is not recommended.

• Do not mow if the grass bag has not been arranged

and the rear cover is lifted, which may RESULT

IN INJURY!

Observe all the above-mentioned requirements care-

fully. Start mowing from the place closest to the power

source (ﬁ g. 3).

5. SERVICE & MAINTENANCE

WARNING! Unplug the electric cable (power

source) prior to any maintenance or prepara-

tory storage operations.

Cleaning

Grass or soil residues shall be removed with a brush

and wooden trowel. Clean the housing regularly with

a soft cloth, preferably every time it is used. Remove

stubborn dirt with a soft rag moistened in soapy water.

Do not use any solvents such as petrol, alcohol, am-

monia, etc. as such substances can damage the plastic

parts.

ATTENTION! Washing of the lawnmower un-

der a sheet of water is prohibited - the water-

tightness of the body secures the IP 34 class

only (is not entirely water-tight)!

Maintenance

Inspect the wear-out of main units periodically. Deterio-

ration in mowing quality, detected after a certain period

of time, may signify that the blade of the lawnmower

has got blunt.

The following regulations shall be observed for the

sharpening of blade:

• the blade shall be cooled constantly during sharpen-

ing to prevent inadmissible overheating

• the blade shall be sharpened evenly on all sides to

prevent vibration of the blade during operation

• if you note any cracks or slits, the blade shall be re-

placed with a new one (as well as in the case where

the area of the blade decreases by over 5 millim-

eters during sharpening)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Defort DLM-1010N Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info