Bedienungsanleitung DeLonghi Dinamica ECAM 350.35 (Seite 12 von 24) (Englisch)

687415

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

- Energy saving,

- Beep,

- Default beverages,

- Default values;

• Statistics.

8.1 Rinsing

Use this function to deliver hot water from the coee spouts

(A19) to clean and heat the appliance’s internal circuit.

Place a container with a minimum capacity of 100ml under the

coee spouts.

Important! Danger of burns.

Do not leave the appliance unattended while hot water is being

delivered.

To perform a rinse, proceed as follows:

1. Press (B5) to enter the "Settings" menu;

2. Press OK B3 to conrm "Rinsing";

3. After a few seconds, hot water is delivered from the coee

spouts to clean and heat the appliance’s internal circuit. A

progress bar is displayed and lls gradually as preparation

proceeds;

4. To interrupt, press the arrow corresponding to "STOP" (B4).

Please note!

• If the appliance is not used for more than 3-4 days, when

switched on again, we strongly recommend performing

2/3 rinses before use;

• After cleaning, it is normal for the coee grounds container

(A11) to contain water.

8.2 Language

To modify the language of the display (B1), proceed as follows:

1. Press (B5) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "Language" is

displayed between the two dotted lines;

3. Press OK (B3). The available languages are displayed;

4. Press the selection arrows until the required language is

displayed between the two dotted lines;

5. Press OK to conrm;

6. The appliance goes back to the "Settings" menu;

7. Press /ESC to exit the menu.

8.3 Maintenance

Here you can nd all the maintenance operations required by

the appliance over time:

• Descale: For instructions on descaling, see section “14.

Descaling”.

• Install lter: For instructions on how to install the lter

(C4), see section “16.1 Installing the lter”.

To select the operation you require, proceed as follows:

1. Press (B5) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "Maintenance"

is displayed between the two dotted lines;

3. Press OK B3 to conrm;

4. Press the selection arrows to display the operation to be

performed;

5. Press OK to conrm and perform the operations as de-

scribed in the corresponding sections.

8.4 Program beverages

The appliance is set by default to automatically deliver stand-

ard quantities. To change these quantities and customise the

directly selected beverages and (B12), proceed as

follows:

1. Press (B5) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "Prg. beverag-

es" is displayed between the two dotted lines;

3. Press OK (B3) to conrm: the appliance lists the beverages

you can customise;

4. Press the selection arrows until the beverage you want to

customise is displayed, then press OK to conrm;

5. Beverages with coee: "Program aroma" appears on

the display: press the selection arrows (B2 and B4) or

(B7) until the required aroma is selected (see section “9.4

Temporarily varying the coee aroma”), then press OK.

"Program coee" appears on the display together with a

bar which gradually lls as delivery progresses. When the

required quantity is reached, press OK;

Hot water: press OK. Delivery begins: press OK when the

required quantity is reached.

6. "Save parameters?": to save the settings, press OK (other-

wise press /ESC - B2 or B5).

7. "Parameters saved" (or "Parameters not saved"). The ap-

pliance is ready for use again.

8.5 Program My beverages

Follow the procedures described in the previous section “8.4 Pro-

gram beverages”to customise the beverages in the "

" (B13) or proceed with direct programming, as described in

section “11. Programming and selecting”.

8.6 General

Here you can nd the settings to customise the basic functions

of the appliance:

1. Press (B5) to enter the "Settings" menu;

2. Press the selection arrows (B2 and B4) until "General" is

displayed between the two dotted lines;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi Dinamica ECAM 350.35 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi Dinamica ECAM 350.35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info